You may also like
B-Line Eaton series fastener hardware and accessories, 100 lbs load capacity , 145 lbs load capacity , Zinc alloy material, 3/16" X 7/8" shank size an
Model: BLN-ADN-18-87
Eaton B-Line series fastener hardware and accessories, 100 lbs load capacity (shear), 145 lbs load capacity (tension), Zinc alloy material, 3/16" X 7/8" shank size and length, Drive nail anchor
B-LINE
$103.61
$63.76
Eaton B-Line series fastener hardware and accessories, 630 lb load capacity, Steel, 3/8", Straight shank
Manufacturer Resources
Product Specs
- Certifications:
- cULus Listed
- Load Capacity:
- 630 lbs
- Product Height:
- 1.5 in
- Product Length Depth:
- 1.5 in
- Product Weight:
- .14 lb
- Product Width:
- .375 in
- Department:
- Electrical
- Product Type:
- Straight shank
- Product Size:
- 3/8 inch
- Product Details:
- Straight shank
- Product Material:
- Steel
B-LINE 1380 – Frequently Asked Questions
1) How much weight can the B-Line 1380 straight shank fastener hold?
The Eaton B-Line 1380 carries a 630 lb load capacity. That is the published rating for the fitting itself, so your anchor, rod, and the structure it lands in still have to be sized for at least that much before you can use the full number.
2) What rod size does the B-Line 1380 take?
It is a 3/8 inch size fitting, so it pairs with 3/8 inch threaded rod or hardware. Body dimensions are 1.5 in height, 1.5 in length/depth, and .375 in width.
3) Is the Eaton B-Line 1380 UL listed for electrical support work?
Yes, it is cULus Listed, which covers both the US and Canadian listings. That is the piece an inspector or an institutional spec usually wants to see on hanger and fastener hardware in an electrical support assembly.
4) What is a straight shank fastener fitting used for versus an angled or offset one?
Straight shank means the shank runs in line with the fastening point, so the load hangs directly below the attachment with no offset. That is what you want when the rod or hanger drops straight down off the structure. If you need the hanging point pushed out to one side of the attachment, a straight shank will not do it and you want an offset or angle style fitting instead.
5) Is the B-Line 1380 steel or stainless, and can I use it outdoors?
The 1380 is steel. No stainless or corrosion-resistant coating is part of its material spec, so treat it as an interior or protected-location part and pick a corrosion-rated fitting for wet, coastal, or corrosive environments.
6) What part number should I put on the purchase order for this B-Line fastener?
Order it as Eaton B-Line model 1380. That is the manufacturer part number, and it is the 3/8 inch steel straight shank fitting rated at 630 lb.
7) How much does one B-Line 1380 fitting weigh for a bulk hardware order?
Each piece weighs .14 lb. Useful when you are figuring carton weight on a pallet quantity for a large conduit or MRO stock order, since these get ordered by the hundreds.
How fast can I get the B-LINE 1380 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 1380 come with a warranty?
Absolutely. The B-LINE 1380 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 1380?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 1380 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.