B-Line Eaton series free standing enclosure accessories, 4X, Brushed, Type 4x double-door, Mounted back to back, Free-standing enclosure accessories

The AF7272P carries a NEMA 4X degree of protection, so it is intended for locations where the enclosure assembly gets hosed down or sees corrosive atmosphere, such as food processing, wastewater, and marine-adjacent plants. It is also UL Listed. The brushed finish is consistent with a stainless-type 4X installation rather than a painted indoor-only cabinet.

Plan the pad or floor area around 67.87 inches by 68 inches, with a height of 59.87 inches. Because it is a back-to-back mounted arrangement, doors swing on both faces, so leave working clearance on two sides rather than one when you lay out the electrical room or skid.

The AF7272P is a free-standing enclosure accessory in the Eaton B-Line series, built for a Type 4X double-door, back-to-back mounted arrangement. It works with a free-standing enclosure lineup rather than replacing one, so specify your 4X enclosure bodies first and add this to complete the back-to-back configuration.

Order it as Eaton B-Line AF7272P. That is the single model on the item, so there is no finish or size selection to make on the order line, the brushed 4X configuration is what ships.

For a washdown, coastal, or chemical exposure, the 4X rating is what you want, it adds corrosion resistance on top of the dust and hose-directed water protection. If the installation is a dry indoor plant floor with only oil and dust, a Type 12 free-standing lineup costs less to buy and covers that duty; the 4X spec here is the one to hold onto when water or corrosives are in play.

Yes. The double-door configuration on the AF7272P means two leaves across the front opening rather than one, which is how you get full-width access to a wide backpan without needing a single door that swings nearly six feet clear. Combined with back-to-back mounting, you can reach equipment from either face of the lineup.