Eaton B-Line series Grip Strut eight diamond plank, 144" Grating length, 18.75" Grating width, Aluminum, 2" Channel size, Grip Strut, .100" Thick
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 2"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 12 gauge
- Product Height:
- 2 in
- Product Length Depth:
- 144 in
- Product Weight:
- 2.79 lb
- Product Width:
- 18.75 in
- Department:
- Electrical
- Product Material:
- Aluminum
B-LINE 82010F 12 AL – Frequently Asked Questions
1) Is this Grip Strut plank OSHA compliant for walkway and platform use?
Yes. The eight diamond Grip Strut plank is listed as OSHA compliant, and its intended application is safe, sturdy footing where non-slip is required. The diamond openings are pierced and formed so each opening edge acts as a traction point, which is why it gets specified on catwalks, mezzanines, and equipment platforms rather than plain plate.
2) Should I use aluminum Grip Strut or steel for an outdoor or washdown platform?
This plank is aluminum, 12 gauge, and that is the material to pick where corrosion is the concern: exterior catwalks, wastewater, food processing washdown, coastal sites, and anywhere a galvanized coating would eventually get cut or scratched during install. Aluminum also keeps the piece light enough for one person to set a 12 foot length. Steel Grip Strut is the choice when you need higher load capacity per span or the run is inside a dry industrial building where corrosion is not driving the decision.
3) How thick is the aluminum on this Grip Strut plank?
The material is 12 gauge aluminum, stated as .100 inch thick in the product description. That is the figure to check against your spec drawing, since Grip Strut planks are commonly called out by gauge and channel depth together: here it is 12 gauge in a 2 inch channel.
4) Can Grip Strut plank be cut to length in the field?
Aluminum Grip Strut at 12 gauge cuts cleanly on site with a metal-cutting saw, which is how most 144 inch planks get fitted to an actual platform opening. Cut ends leave exposed edges, so deburr them and plan your support so the cut end still lands on steel rather than cantilevering.
How fast can I get the B-LINE 82010F 12 AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 82010F 12 AL come with a warranty?
Absolutely. The B-LINE 82010F 12 AL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 82010F 12 AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 82010F 12 AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.