You may also like
B-Line Eaton series Grip Strut eight diamond plank, 240" Grating length, 36" Grating width, Steel, 5" Channel size, Galvanized, Grip Strut, 10 gauge
Model: BLN-85010 20 GL
Eaton B-Line series Grip Strut eight diamond plank, 240" Grating length, 36" Grating width, Steel, 5" Channel size, Galvanized, Grip Strut, 10 gauge
B-LINE
$11,673.47
B-Line Eaton series Grip Strut eight diamond plank, 288" Grating length, 36" Grating width, Steel, 5" Channel size, Mill-galvanized, 10 gauge
Model: BLN-85010 24 GL
Eaton B-Line series Grip Strut eight diamond plank, 288" Grating length, 36" Grating width, Steel, 5" Channel size, Mill-galvanized, 10 gauge
B-LINE
$14,009.33
B-Line Eaton series Grip Strut eight diamond plank, 120" Grating length, 36" Grating width, Steel, 5" Channel size, Mill-galvanized, 10 gauge
Model: BLN-85010 10 GL P
Eaton B-Line series Grip Strut eight diamond plank, 120" Grating length, 36" Grating width, Steel, 5" Channel size, Mill-galvanized, 10 gauge
B-LINE
$6,012.26
B-Line Eaton series Grip Strut eight diamond plank, 144" Grating length, 36" Grating width, Steel, 5" Channel size, Mill-galvanized, 10 gauge
Model: BLN-85010 12 GL
Eaton B-Line series Grip Strut eight diamond plank, 144" Grating length, 36" Grating width, Steel, 5" Channel size, Mill-galvanized, 10 gauge
B-LINE
$7,007.56
B-Line Eaton series Grip Strut eight diamond plank, 120" Grating length, 36" Grating width, Steel, 5" Channel size, Galvanized, Grip Strut, 10 gauge
Model: BLN-85010 10 GL
Eaton B-Line series Grip Strut eight diamond plank, 120" Grating length, 36" Grating width, Steel, 5" Channel size, Galvanized, Grip Strut, 10 gauge
B-LINE
$5,838.67
Eaton B-Line series Grip Strut eight diamond plank, 240" Grating length, 36" Grating width, Steel, 5" Channel size, Mill-galvanized, 10 gauge
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 5"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 10 gauge
- Product Height:
- 5 in
- Product Length Depth:
- 240 in
- Product Weight:
- 22.7 lb
- Product Width:
- 36 in
- Department:
- Electrical
- Product Finish:
- Mill-galvanized
- Product Material:
- Steel
B-LINE 85010 20 GL P – Frequently Asked Questions
1) What size walkway does one B-Line Grip Strut eight diamond plank cover?
Each plank runs 240 inches long by 36 inches wide, so a single piece covers 20 linear feet of 3-foot-wide walkway. The channel is 5 inches, which is the depth of the formed side rails, so plan your support spacing and any curb or toe clearance around a 5 inch section height.
2) Is this Grip Strut plank OSHA compliant for a plant catwalk?
The eight diamond Grip Strut plank is listed as OSHA compliant and is made for safe, sturdy footing where non-slip is required. The pierced and formed diamond openings give traction in oil, mud, ice and snow conditions typical of a plant catwalk or mezzanine run.
3) What gauge and material is the B-Line 85010 20 GL P Grip Strut plank, and will it hold up outdoors?
It is 10 gauge steel with a mill-galvanized finish. Mill-galvanized means the zinc coating is applied to the coil before forming, so the cut and pierced edges are bare steel. That is fine for covered or interior industrial areas and light outdoor exposure, but for a corrosive or constantly wet environment you want a hot-dip galvanized-after-fabrication or stainless plank instead.
4) What is the difference between an eight diamond Grip Strut plank and a two or four diamond tread?
The diamond count is the number of traction diamond rows across the width of the piece. Eight diamonds across gives the full 36 inch walking width here, which is what you use for walkways, catwalks, platforms and mezzanine decking. Two and four diamond pieces are narrow sections meant for stair treads and single-foot crossovers. If you are decking a run rather than covering steps, the eight diamond 36 inch plank is the right one.
5) Does the B-Line Grip Strut plank come with mounting hardware or clips?
The 85010 20 GL P is the plank only, supplied as a single 240 inch piece. Saddle clips, hold-down clips, bolts and any support framing or stringers are ordered separately, so include those on the same order if you are building the walkway from scratch.
6) Can Grip Strut plank be cut to length in the field?
Yes, the 10 gauge steel plank can be cut on site to suit the run. Because the finish is mill-galvanized, any cut end exposes bare steel, so brush a cold galvanizing compound on the cut edge if the walkway sees moisture.
7) What is the exact part number to order this Grip Strut plank?
Order Eaton B-Line part number 85010 20 GL P. That designation breaks down to the 5 inch channel eight diamond plank, 20 foot length, galvanized finish, in a 36 inch width.
How fast can I get the B-LINE 85010 20 GL P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 85010 20 GL P come with a warranty?
Absolutely. The B-LINE 85010 20 GL P is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 85010 20 GL P?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 85010 20 GL P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.