Eaton B-Line series Grip Strut five diamond plank, 120" Grating length, 11.75" Grating width, Steel, 2" Channel size, Stainless steel type 304, Grip Strut
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 2"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 16 gauge
- Product Height:
- 2 in
- Product Length Depth:
- 120 in
- Product Weight:
- 3.7 lb
- Product Width:
- 11.75 in
- Department:
- Electrical
- Product Finish:
- Stainless steel type 304
- Product Material:
- Steel
B-LINE 52016F 10 SS – Frequently Asked Questions
1) Is this Grip Strut plank OSHA compliant for walkways and platforms?
Yes. The five diamond plank is listed as OSHA compliant and is intended for safe, sturdy footing where a non-slip surface is required, such as catwalks, mezzanine walkways, platforms and stair treads.
2) Will 304 stainless Grip Strut hold up in a washdown or corrosive area?
This plank is type 304 stainless steel, which is the grade specified for food processing, washdown, wastewater and chemical areas where painted or galvanized steel grating would rust out. For chloride-heavy or marine exposure, buyers normally step up to a 316 grade instead.
3) What gauge material is the B-Line five diamond Grip Strut plank made from?
It is formed from 16 gauge steel in a 304 stainless finish. The 2 inch formed channel on each side is what carries the load between supports, so the span you can run without intermediate framing depends on that channel depth, not the sheet gauge alone.
4) What is the difference between five diamond Grip Strut plank and the narrower two or three diamond planks?
The diamond count describes how many rows of pierced, raised diamond openings run across the width of the plank. Five diamond gives the widest walking surface, at 11.75 inches here, so fewer pieces are needed to make up a walkway or platform. Narrower diamond counts are used for stair treads and tight ledges where a full-width plank will not fit.
5) Can Grip Strut plank be cut to length in the field?
Planks ship at a fixed 120 inch length and are commonly cut down on site to suit the opening. Cut ends on 304 stainless should be deburred so the exposed edge does not become a hand hazard, and the piece still needs bearing support at both ends after cutting.
How fast can I get the B-LINE 52016F 10 SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 52016F 10 SS come with a warranty?
Absolutely. The B-LINE 52016F 10 SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 52016F 10 SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 52016F 10 SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.