Eaton B-Line series Grip Strut five diamond plank, 120" Grating length, 11.75" Grating width, Steel, 3" Channel size, Plain, 12 gauge
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 3"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 12 gauge
- Product Height:
- 3 in
- Product Length Depth:
- 120 in
- Product Weight:
- 7 lb
- Product Width:
- 11.75 in
- Department:
- Electrical
- Product Finish:
- Plain
- Product Material:
- Steel
- Product Length:
- 120 in
B-LINE 53012 10 BL – Frequently Asked Questions
1) What size opening does the B-Line Grip Strut five diamond plank cover?
Each plank runs 120 inches long by 11.75 inches wide, so one piece spans a 10 foot walkway run and covers just under a foot of width. For a wider catwalk or platform you lay planks side by side and count on 11.75 inches of coverage per plank.
2) Is Grip Strut plank OSHA compliant for walkways and work platforms?
Yes. The five diamond Grip Strut plank is listed as OSHA compliant and is intended to give safe, sturdy footing wherever a non-slip surface is required, which is what makes it common on catwalks, equipment platforms, and stair treads in plants and utility spaces.
3) How deep are the side channels on this Grip Strut plank, and how much does it stand off the supports?
The plank is formed with 3 inch channel sides, which is also the overall height of the piece. Plan your support steel and any handrail or toeboard heights around that 3 inch build-up above the framing.
4) Does the plain finish on this Grip Strut need to be painted or galvanized for outdoor use?
This one is steel with a plain finish, meaning bare, uncoated material. Indoors and in dry areas it is used as is; outdoors or in a washdown or corrosive area you either coat it after install or specify a galvanized or stainless version instead.
5) How heavy is a 10 foot Grip Strut plank to handle on site?
A 10 foot plank weighs 7 pounds, so a single person can carry and set it without a lift. That light weight is one reason formed steel plank gets used for retrofit walkways where bar grating would need rigging.
6) What gauge steel is the B-Line five diamond Grip Strut plank made from?
It is formed from 12 gauge steel. That gauge, combined with the 3 inch formed side channels, is what carries the load between supports rather than the flat surface itself.
How fast can I get the B-LINE 53012 10 BL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 53012 10 BL come with a warranty?
Absolutely. The B-LINE 53012 10 BL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 53012 10 BL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 53012 10 BL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.