B-Line Eaton series Grip Strut five diamond plank, 144" Grating length, 11.75" Grating width, Steel, 2.5" Channel size, Plain, Grip Strut, 14 gauge

The plank runs 144 inches long (12 feet) and 11.75 inches wide, with a 2.5 inch channel depth. That 11.75 inch width is the walking surface per plank, so for a wider catwalk or platform you run planks side by side until you cover the span. Height over the support is 2.5 inches, which you need to allow for when checking clearances under ductwork, conduit, or a door swing at the platform edge.

Yes. The five diamond Grip Strut plank is listed as OSHA compliant and is made for safe, sturdy footing where a non-slip surface is required. The punched diamond openings shed water, oil, mud, ice and debris rather than holding them on the surface, which is why it gets used on mechanical platforms, catwalks and equipment access ways instead of smooth plate.

Grip Strut is a one piece formed steel plank, 14 gauge here, with a punched and turned diamond surface that gives grip in every direction. Bar grating is a welded assembly of bearing bars and is heavier for the same coverage. Choose the plank when you want a light, quick to install non-slip walking surface in a fixed 11.75 inch module; choose bar grating when you need heavier load capacity or a custom cut panel shape.

Yes. It is 14 gauge formed steel, so a 144 inch plank can be cut down with a chop saw or band saw to suit the run. Cutting removes the finish at the cut, and since this one ships plain steel with no coating, prime or paint the cut ends if the platform will see any moisture.