Eaton B-Line series Grip Strut five diamond plank, 144" Grating length, 11.75" Grating width, Steel, 4" Channel size, Mill-galvanized, Grip Strut, 10 gauge
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 4"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 10 gauge
- Product Height:
- 4 in
- Product Length Depth:
- 144 in
- Product Weight:
- 16.4 lb
- Product Width:
- 11.75 in
- Department:
- Electrical
- Product Finish:
- Mill-galvanized
- Product Material:
- Steel
- Product Length:
- 144 in
B-LINE 54010 12 GL – Frequently Asked Questions
1) What size opening does the B-Line Grip Strut five diamond plank cover?
The Eaton B-Line Grip Strut five diamond plank runs 144 inches long by 11.75 inches wide, with a 4 inch channel height. That covers a 12 foot span of walkway or platform per plank, so for a wider walk surface you set planks side by side and multiply the 11.75 inch width by the number of runs.
2) Is this Grip Strut plank OSHA compliant for walkways and platforms?
Yes. The Grip Strut five diamond plank is listed as OSHA compliant, and the diamond openings are punched to give footing where a non-slip surface is required, including on grease, ice or wet walking surfaces in plant and utility areas.
3) Will mill-galvanized Grip Strut hold up outdoors or does it need hot-dip?
The plank is 10 gauge steel with a mill-galvanized finish, meaning the zinc coating was applied to the coil before forming and punching. That suits covered, sheltered and general industrial use. Cut ends and punched diamonds are bare at the edges, so for constant weather exposure, salt air or wash-down service, spec a hot-dip galvanized or stainless plank instead.
4) What is the difference between a Grip Strut plank and plain bar grating?
Grip Strut is a one-piece formed steel plank with punched diamond openings whose raised edges grip the sole of a boot in several directions. Bar grating relies on flat bar edges and drains more open area. Where you need positive footing on a maintenance catwalk, stair tread run or platform, the diamond plank is the choice; this one is 10 gauge steel with 4 inch deep channel sides, so it carries itself between supports without a separate frame under every foot.
5) Are mounting clips or hardware included with this Grip Strut plank?
What ships is the formed steel plank itself. Hold-down clips, saddle washers, bolts or weld attachment to your framing are ordered separately and chosen to suit the supporting steel, so add fasteners to the order when you spec the planks.
How fast can I get the B-LINE 54010 12 GL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 54010 12 GL come with a warranty?
Absolutely. The B-LINE 54010 12 GL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 54010 12 GL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 54010 12 GL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.