You may also like
B-Line Eaton series Grip Strut four diamond plank, 144" Grating length, 9.5" Grating width, Aluminum, 1.5" Channel size, Grip Strut, .080" Thick
Model: BLN-41512N 12 AL
Eaton B-Line series Grip Strut four diamond plank, 144" Grating length, 9.5" Grating width, Aluminum, 1.5" Channel size, Grip Strut, .080" Thick
B-LINE
$1,323.20
B-Line Eaton series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Aluminum, 2.5" Channel size, Grip Strut, .080" Thick
Model: BLN-42512 10 AL
Eaton B-Line series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Aluminum, 2.5" Channel size, Grip Strut, .080" Thick
B-LINE
$1,126.46
B-Line Eaton series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Aluminum, 3" Channel size, Grip Strut, .080" Thick
Model: BLN-43012 10 AL
Eaton B-Line series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Aluminum, 3" Channel size, Grip Strut, .080" Thick
B-LINE
$1,188.19
B-Line Eaton series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Aluminum, 1.5" Channel size, Grip Strut, .100" Thick
Model: BLN-41510 10 AL
Eaton B-Line series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Aluminum, 1.5" Channel size, Grip Strut, .100" Thick
B-LINE
$1,199.76
B-Line Eaton series Grip Strut four diamond plank, 144" Grating length, 9.5" Grating width, Aluminum, 3" Channel size, Grip Strut, .080" Thick
Model: BLN-43012 12 AL
Eaton B-Line series Grip Strut four diamond plank, 144" Grating length, 9.5" Grating width, Aluminum, 3" Channel size, Grip Strut, .080" Thick
B-LINE
$1,425.43
Eaton B-Line series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Aluminum, 1.5" Channel size, Grip Strut, .080" Thick
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 1.5"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 14 gauge
- Product Height:
- 1.5 in
- Product Length Depth:
- 120 in
- Product Weight:
- 1.28 lb
- Product Width:
- 9.5 in
- Department:
- Electrical
- Product Material:
- Aluminum
B-LINE 41512 10 AL – Frequently Asked Questions
1) What size is the B-Line Grip Strut four diamond plank, and how wide a walking surface does one piece give me?
Each plank runs 120 inches long by 9.5 inches wide, with a 1.5 inch channel depth. So a single length covers a 10 foot run and just under 10 inches of walkway. For a wider catwalk, lay planks side by side and count on 9.5 inches of tread per plank.
2) Is this Grip Strut plank OSHA compliant for walkway and platform use?
Yes. The four diamond Grip Strut plank is OSHA compliant and is made for safe, sturdy footing where a non-slip surface is required, which is what makes it usable on elevated walkways, stair treads and equipment platforms in industrial plants.
3) Should I use the aluminum Grip Strut plank or a steel one?
Aluminum is the call where corrosion or weight is the problem: wet process areas, coastal or chemical exposure, rooftop access, and anywhere crews have to carry 10 foot lengths up a ladder. This plank is aluminum in 14 gauge material. Galvanized or stainless steel versions of the same four diamond pattern exist for higher load or heat duty, so if the walkway is carrying heavy rolling loads or long unsupported spans, price out a steel plank instead.
4) How thick is the material on this Grip Strut plank?
The plank is formed from 14 gauge aluminum, and the formed channel stands 1.5 inches high. The depth of that channel is what carries the load between supports, not the sheet thickness alone, so set your support spacing off the channel depth rather than the gauge.
5) What is the model number for the 10 foot aluminum Grip Strut plank in 9.5 inch width?
Order it as Eaton B-Line part 41512 10 AL. That designation covers the four diamond plank, 9.5 inches wide, 120 inches long, 1.5 inch channel, aluminum.
6) Does the Grip Strut plank come with clips or fasteners for mounting to the support steel?
The 41512 10 AL is the plank itself. Hold down clips, saddle clips and bolts for fastening the channel legs to your bearing steel are ordered separately, so add those to the same order along with any end closure or nosing you need for a stair tread application.
7) Why is the four diamond pattern used instead of a plain plank or expanded metal?
The four diamond Grip Strut surface is punched and formed into serrated diamond openings across the tread, which drain water, oil and debris and grip from every direction. That is what gets it its non-slip application rating. Plain plate goes slick as soon as anything spills on it, which is why Grip Strut turns up on stair treads and process platforms.
How fast can I get the B-LINE 41512 10 AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 41512 10 AL come with a warranty?
Absolutely. The B-LINE 41512 10 AL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 41512 10 AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 41512 10 AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.