You may also like
B-Line Eaton series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 1.5" Channel size, Mill-galvanized, 14 gauge
Model: BLN-41514N 10 GL
Eaton B-Line series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 1.5" Channel size, Mill-galvanized, 14 gauge
B-LINE
$685.29
B-Line Eaton series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 2" Channel size, Mill-galvanized, 12 gauge
Model: BLN-42012N 10 GL
Eaton B-Line series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 2" Channel size, Mill-galvanized, 12 gauge
B-LINE
$953.30
B-Line Eaton series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 2.5" Channel size, Mill-galvanized, Grip Strut, 14
Model: BLN-42514 10 GL
Eaton B-Line series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 2.5" Channel size, Mill-galvanized, Grip Strut, 14 gauge steel
B-LINE
$695.46
B-Line Eaton series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Grip Strut, 14
Model: BLN-41514F 10 GL
Eaton B-Line series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Grip Strut, 14 gauge
B-LINE
$595.39
B-Line Eaton series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 2" Channel size, Mill-galvanized, Grip Strut, 14 ga
Model: BLN-42014 10 GL
Eaton B-Line series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 2" Channel size, Mill-galvanized, Grip Strut, 14 gauge steel
B-LINE
$668.33
Eaton B-Line series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 2" Channel size, Mill-galvanized, 14 gauge
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 2"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 14 gauge
- Product Height:
- 2 in
- Product Length Depth:
- 120 in
- Product Weight:
- 3.8 lb
- Product Width:
- 9.5 in
- Department:
- Electrical
- Product Finish:
- Mill-galvanized
- Product Material:
- Steel
B-LINE 42014N 10 GL – Frequently Asked Questions
1) What size opening does the B-Line Grip Strut four diamond plank cover?
Each Grip Strut plank runs 120 inches long by 9.5 inches wide, with a 2 inch channel depth. For a walkway wider than 9.5 inches you run planks side by side, and the 2 inch channel height is what has to clear your support framing and any conduit or piping below the walking surface.
2) Is this grating OSHA compliant for a plant catwalk or platform?
The Grip Strut four diamond plank is listed as OSHA compliant and is intended for safe, sturdy footing where non-slip is required. The diamond openings are punched and formed so the edges bite through grease, water, ice and mud, which is the reason it gets specified for plant catwalks, mezzanine walkways and equipment platforms.
3) Will mill-galvanized Grip Strut hold up outdoors or in a wash-down area?
Mill-galvanized is the finish on this 14 gauge steel plank. The zinc goes on the coil before forming, so the punched and sheared edges of the diamond openings are bare steel and will show surface rust in a wet or wash-down environment. It is fine for covered indoor catwalks and general industrial use. For constant moisture, chemical exposure or coastal air, specify a hot-dip galvanized-after-fabrication or stainless plank instead.
4) Does the Grip Strut plank come with mounting clips or fasteners?
The 42014N 10 GL is the plank only. Saddle clips, hold-down clips, bolts and any supporting channel or angle framing are ordered separately, so budget the attachment hardware and the support steel alongside the grating when you price the walkway.
5) What is the difference between four diamond Grip Strut plank and a two or three diamond plank?
Diamond count sets the walking width. This one is a four diamond plank at 9.5 inches wide, which suits a single-plank stair tread or a narrow catwalk run. Fewer diamonds gives you a narrower plank for tight tread widths or ladder rungs; wider walkways are built by ganging planks rather than by one very wide piece. Channel depth here is 2 inches regardless.
6) Can I cut Grip Strut plank to length in the field?
Yes, 14 gauge steel plank cuts with a chop saw or band saw, and a 120 inch stick is usually cut down to suit tread or bay spacing. Any cut end exposes bare steel on a mill-galvanized part, so touch up with a zinc-rich cold galvanizing compound if the walkway sees any moisture.
How fast can I get the B-LINE 42014N 10 GL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 42014N 10 GL come with a warranty?
Absolutely. The B-LINE 42014N 10 GL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 42014N 10 GL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 42014N 10 GL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.