Eaton B-Line series Grip Strut four diamond plank, 144" Grating length, 9.5" Grating width, Material: Aluminum, 2" Channel size, Grip Strut, .080" Thick
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 2"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 14 gauge
- Product Height:
- 2 in
- Product Length Depth:
- 144 in
- Product Weight:
- 1.37 lb
- Product Width:
- 9.5 in
- Department:
- Electrical
- Product Material:
- Aluminum
B-LINE 42012F 12 AL – Frequently Asked Questions
1) Is B-Line Grip Strut four diamond plank OSHA compliant for walking surfaces?
It is listed as OSHA compliant, and the four diamond pierced pattern is what does it: the raised diamond edges give slip resistance in the direction of travel and in cross traffic, which is the point of the plank on catwalks, platform decking and stair treads.
2) Aluminum or steel Grip Strut plank, which should I use?
This one is aluminum, 14 gauge, in a 2 inch channel. Aluminum is the pick outdoors, in wash-down areas, near chemical or marine exposure, and anywhere crews have to lift and set planks by hand. Go to a galvanized or stainless steel plank instead where the loads are heavier or the deck sees hot work and sparks, since aluminum has lower load capacity at the same gauge and depth.
3) How deep is the channel on this plank, and will it clear my support steel?
Channel depth is 2 inches, which is also the overall height of the plank. Add that 2 inches to your support beam depth when you are working out finished walking surface elevation and headroom under the platform.
4) Does the Grip Strut plank come with clips or fasteners to attach it to the supports?
The 42012F 12 AL is the plank only. Hold-down clips, bolts or welds to secure the channel legs to your supports are ordered separately, so plan the attachment hardware with the plank count.
5) Where is four diamond Grip Strut plank typically used on a job?
Anywhere crews need sure footing: mechanical platforms, rooftop walkways over equipment, ladder and stair landings, pit and trench covers, and service catwalks around electrical or HVAC gear. The pierced diamond surface sheds water, oil and debris through the deck rather than holding it on top.
How fast can I get the B-LINE 42012F 12 AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 42012F 12 AL come with a warranty?
Absolutely. The B-LINE 42012F 12 AL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 42012F 12 AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 42012F 12 AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.