You may also like
B-Line Eaton series Grip Strut ten diamond plank, 120" Grating length, 24" Grating width, Steel, 3" Channel size, Mill-galvanized, Grip Strut, 14 gaug
Model: BLN-103014 10 GL
Eaton B-Line series Grip Strut ten diamond plank, 120" Grating length, 24" Grating width, Steel, 3" Channel size, Mill-galvanized, Grip Strut, 14 gauge
B-LINE
$1,301.04
B-Line Eaton series Grip Strut ten diamond plank, 120" Grating length, 24" Grating width, Steel, 4.5" Channel size, Galvanized, Grip Strut, 14 gauge
Model: BLN-104514 10 GL P3
Eaton B-Line series Grip Strut ten diamond plank, 120" Grating length, 24" Grating width, Steel, 4.5" Channel size, Galvanized, Grip Strut, 14 gauge
B-LINE
$1,491.01
B-Line Eaton series Grip Strut ten diamond plank, 120" Grating length, 24" Grating width, Steel, 4.5" Channel size, Mill-galvanized, Grip Strut
Model: BLN-104514 10 GL P7
Eaton B-Line series Grip Strut ten diamond plank, 120" Grating length, 24" Grating width, Steel, 4.5" Channel size, Mill-galvanized, Grip Strut
B-LINE
$1,491.01
B-Line Eaton series Grip Strut ten diamond plank, 144" Grating length, 24" Grating width, Steel, 2" Channel size, Mill-galvanized, Grip Strut, 14 gaug
Model: BLN-102014 12 GL
Eaton B-Line series Grip Strut ten diamond plank, 144" Grating length, 24" Grating width, Steel, 2" Channel size, Mill-galvanized, Grip Strut, 14 gauge steel
B-LINE
$1,465.58
B-Line Eaton series Grip Strut ten diamond plank, 120" Grating length, 24" Grating width, Steel, 2" Channel size, Mill-galvanized, 14 gauge
Model: BLN-102014 10 GL
Eaton B-Line series Grip Strut ten diamond plank, 120" Grating length, 24" Grating width, Steel, 2" Channel size, Mill-galvanized, 14 gauge
B-LINE
$1,221.31
Eaton B-Line series Grip Strut ten diamond plank, 120" Grating length, 24" Grating width, Steel, 2" Channel size, Mill-galvanized, Grip Strut, 14 gauge
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 2"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 14 gauge
- Product Height:
- 2 in
- Product Length Depth:
- 120 in
- Product Weight:
- 7.4 lb
- Product Width:
- 24 in
- Department:
- Electrical
- Product Finish:
- Mill-galvanized
- Product Material:
- Steel
- Product Length:
- 120 in
B-LINE 102014F 10 GL – Frequently Asked Questions
1) Is this Grip Strut plank OSHA compliant for walking surfaces?
Yes. The ten diamond Grip Strut plank is listed as OSHA compliant and is intended for safe, sturdy footing where non-slip is required, which is the usual reason it gets specified on catwalks, mezzanine walkways, and equipment platforms.
2) Will mill-galvanized Grip Strut hold up outdoors or in a wet plant area?
Mill-galvanized steel is the finish here, which means the zinc coating was applied to the coil before forming, so the sheared edges and punched diamonds are bare steel. It handles damp interior and sheltered industrial areas fine. For continuous outdoor exposure, washdown, or corrosive process areas, specify a hot-dip galvanized-after-fabrication or stainless plank instead.
3) What does the 14 gauge on this Grip Strut plank mean for load and foot traffic?
The plank is formed from 14 gauge steel, the heavier of the common Grip Strut thicknesses, with a 2 inch channel depth giving the section its stiffness. Heavier gauge and deeper channel mean longer clear spans between supports than a lighter 12 or 16 diamond pattern in thin material. Set your support spacing from Eaton's load table for the span and live load your walkway has to carry.
4) What does ten diamond mean on Grip Strut planks, and how do I match what is already installed?
Ten diamond refers to the number of diamond rows formed across the width of the plank, which here is 24 inches. Count the diamond rows across an existing plank: if it reads ten across a 24 inch panel, this matches the pattern and walking surface already in place. A three, four, or five diamond plank is a narrower panel and will not line up with a 24 inch bay.
5) Does the Grip Strut plank come with mounting clips or fasteners?
No hardware is included. The plank is supplied as the formed steel walking panel only, so budget separately for hold-down clips, saddle washers, or weld attachment to your support steel, plus any end plates or toe boards the walkway design calls for.
6) Can I cut Grip Strut plank to length on site?
Yes, the 120 inch plank can be cut down to fit a shorter bay with a metal-cutting saw or shear. Because the finish is mill-galvanized rather than galvanized after fabrication, any cut you make leaves bare steel, so brush a zinc-rich cold galvanizing compound on the fresh edge if the location sees moisture.
How fast can I get the B-LINE 102014F 10 GL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 102014F 10 GL come with a warranty?
Absolutely. The B-LINE 102014F 10 GL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 102014F 10 GL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 102014F 10 GL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.