Eaton B-Line series Grip Strut ten diamond plank, 144" Grating length, 24" Grating width, Steel, 3" Channel size, Plain, Grip Strut, 12 gauge steel
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 3"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 12 gauge
- Product Height:
- 3 in
- Product Length Depth:
- 144 in
- Product Weight:
- 11.1 lb
- Product Width:
- 24 in
- Department:
- Electrical
- Product Finish:
- Plain
- Product Material:
- Steel
B-LINE 103012 12 BL – Frequently Asked Questions
1) Is this grating OSHA compliant for walking surfaces?
Yes. The Grip Strut ten diamond plank is listed as OSHA compliant, and the diamond openings give the non-slip footing that requirement is about. That is the answer a facilities or safety manager needs when specifying walkway surfaces on mezzanines, platforms and equipment access routes.
2) What gauge and material is the B-Line 103012 12 BL grating plank?
It is 12 gauge steel with a plain (uncoated) finish. Plain steel is fine indoors or in a dry, conditioned space; if the plank is going outdoors or anywhere it sees washdown or weather, you want a galvanized or coated version instead, because bare steel will rust.
3) How much does a 12 foot Grip Strut plank weigh for handling and load planning?
Each plank weighs 11.1 lb. At that weight a single worker can carry and set a 12 foot section by hand, which matters when you are installing on a mezzanine or over open framing with no lift available.
4) What is the 3 inch channel on Grip Strut plank and does it affect my clearance?
The 3 inch figure is the channel depth, and product height is also given as 3 inches, so the plank sits 3 inches above whatever framing you set it on. Factor that into headroom and into the elevation of your adjacent landings or stair treads so the walking surface finishes flush.
5) Where is Grip Strut ten diamond plank typically used?
It is made for safe, sturdy footing anywhere a non-slip surface is required: equipment platforms, catwalks, mezzanine walkways, ladder landings and access routes around electrical and mechanical gear. The ten diamond pattern sheds liquid and debris rather than holding it on the surface.
6) What is the manufacturer part number for this Eaton B-Line grating plank?
Order it as B-Line 103012 12 BL. That number covers the 144 inch by 24 inch ten diamond Grip Strut plank in 12 gauge plain steel with the 3 inch channel.
How fast can I get the B-LINE 103012 12 BL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 103012 12 BL come with a warranty?
Absolutely. The B-LINE 103012 12 BL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 103012 12 BL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 103012 12 BL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.