B-Line Eaton series Grip Strut...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,012.66
B-Line Eaton series Grip Strut three diamond plank, 120" Grating length, 7" Grating width, Aluminum, 2" Channel size, Grip Strut, .100" Thick

B-Line Eaton series Grip Strut three diamond plank, 120" Grating length, 7" Grating width, Aluminum, 2" Channel size, Grip Strut, .100" Thick

(No reviews yet) Write a Review

Model: 32010F 10 AL
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,012.66
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series Grip Strut three diamond plank, 120" Grating length, 7" Grating width, Aluminum, 2" Channel size, Grip Strut, .100" Thick

Manufacturer Resources

Product Specs

Application:
Safe, sturdy footing where non-slip is required
Channel Size:
2"
Compliances:
OSHA Compliant
Material Gauge:
12 gauge
Product Height:
2 in
Product Length Depth:
120 in
Product Weight:
1.46 lb
Product Width:
7 in
Department:
Electrical
Product Material:
Aluminum

B-LINE 32010F 10 AL – Frequently Asked Questions

1) What size walkway plank is the B-Line Grip Strut 32010F 10 AL, and how much area does one piece cover?
One plank of the Eaton B-Line Grip Strut three diamond plank runs 120 inches long by 7 inches wide, with a 2 inch channel depth. That gives you 10 feet of run per piece at a 7 inch tread width, so crossovers or catwalks wider than 7 inches are built by setting planks side by side.
2) Is this Grip Strut plank OSHA compliant for walking and working surfaces?
The Eaton B-Line Grip Strut three diamond plank is listed as OSHA compliant, and the diamond plank surface is specified for safe, sturdy footing where non-slip is required. That is the reason it gets used on platforms, catwalks, stair treads and equipment access runs instead of plain sheet.
3) Aluminum or steel Grip Strut, which should I use for an outdoor or wash-down platform?
Model 32010F 10 AL is the aluminum version, .100 inch thick at 12 gauge. Aluminum is the choice where corrosion is the issue, outdoors, on rooftops, in wash-down or chemical areas, and where crews have to carry and set planks by hand. Steel planks are the ones to specify when the loading is heavy industrial or vehicle traffic is a factor.
4) What is the exact part number for the 7 inch wide, 10 foot aluminum three diamond Grip Strut plank?
Order it as Eaton B-Line 32010F 10 AL. That designation covers the three diamond plank in aluminum, 120 inch length, 7 inch width, 2 inch channel, .100 inch material. Changing the width or the material changes the part number, so match all four when you spec it.
5) How deep does the Grip Strut plank sit on the supporting steel, and will it clear my framing?
The plank has a 2 inch overall height from the channel form, so figure 2 inches of build-up above the top of your support members. That matters at doorway thresholds and where the walkway has to meet an existing platform elevation, since the finished walking surface sits 2 inches proud of the steel it lands on.
6) Does the Grip Strut plank come with clips or fasteners to attach it to the support steel?
The 32010F 10 AL is supplied as the plank itself, 120 inches by 7 inches in aluminum. Hold-down clips, saddle washers, bolts or self-drilling screws are ordered separately and should be selected to match your support material and to stay compatible with aluminum so you do not set up a dissimilar-metal problem.
7) How much does a 10 foot section of this aluminum Grip Strut plank weigh for hand carrying up a ladder?
The catalog weight on the aluminum Grip Strut plank is 1.46 lb, which is why it is common on jobs where a single worker sets the walkway by hand. Combined with the 120 inch length, the awkward part is the span, not the load.
8) Can I cut this Grip Strut plank to length in the field?
Yes. The plank is .100 inch aluminum at 12 gauge, light enough to be cut on site with a circular saw and a non-ferrous blade, so a 120 inch piece can be trimmed to fit a shorter bay. Protect the cut end, and keep the channel legs intact where the plank bears on its supports.
How fast can I get the B-LINE 32010F 10 AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 32010F 10 AL come with a warranty?
Absolutely. The B-LINE 32010F 10 AL is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 32010F 10 AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 32010F 10 AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!