Eaton B-Line series Grip Strut three diamond plank, 120" Grating length, 7" Grating width, Steel, 1.5" Channel size, Galvanized, Grip Strut, 12 gauge
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 1.5"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 12 gauge
- Product Height:
- 1.5 in
- Product Length Depth:
- 120 in
- Product Weight:
- 4.1 lb
- Product Width:
- 7 in
- Department:
- Electrical
- Product Finish:
- Mill-galvanized
- Product Material:
- Steel
B-LINE 31512N 10 GL – Frequently Asked Questions
1) What size walkway does one B-Line Grip Strut plank cover?
Each plank runs 120 inches long by 7 inches wide, with a 1.5 inch channel depth. For a wider walking surface you run planks side by side, 7 inches of tread width at a time. The 1.5 inch height is what you need to allow for in your support framing and clearance under the walkway.
2) Is B-Line Grip Strut plank OSHA compliant for walkways and platforms?
The three diamond Grip Strut plank is listed as OSHA compliant, and the diamond-pierced surface is the reason: it is made for safe, sturdy footing where non-slip is required. That is what facility and plant safety buyers are specifying it for on catwalks, mezzanine walkways, stair treads and equipment platforms.
3) Will galvanized Grip Strut hold up outdoors or in a wet plant area?
It is 12 gauge steel with a mill-galvanized finish, which is the standard choice for outdoor catwalks, wash-down areas and damp mechanical spaces where bare steel would rust. For severe chemical exposure or coastal salt, a stainless or aluminum grating is the better call.
4) What is the exact part number for the 7 inch wide 10 foot galvanized Grip Strut plank?
Order Eaton B-Line part number 31512N 10 GL. That number covers the three diamond plank in steel, 120 inch length, 7 inch width, 1.5 inch channel, mill-galvanized.
5) Does Grip Strut plank come with mounting hardware or clips?
The 31512N 10 GL is the plank only. Hold-down clips, saddle clips, bolts and any support angle or stringer are ordered separately, so size your fasteners to the 1.5 inch channel depth when you spec them.
6) Can I cut Grip Strut plank to length on site?
Yes, the 12 gauge steel plank is commonly field cut to suit an opening from the 120 inch stock length. Cut ends and any drilled holes should be touched up with a zinc-rich coating, since the mill-galvanized finish will not protect raw cut edges.
How fast can I get the B-LINE 31512N 10 GL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 31512N 10 GL come with a warranty?
Absolutely. The B-LINE 31512N 10 GL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 31512N 10 GL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 31512N 10 GL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.