B-Line Eaton series Grip Strut...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$812.06
Image coming soon

B-Line Eaton series Grip Strut two diamond plank, 144" Grating length, 4.75" Grating width, Steel, 2.5" Channel size, Mill-galvanized, Grip Strut, 14

(No reviews yet) Write a Review

Model: 22514 12 GL

In Stock (leaves warehouse same day if ordered before 3pm ET)

$812.06
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series Grip Strut two diamond plank, 144" Grating length, 4.75" Grating width, Steel, 2.5" Channel size, Mill-galvanized, Grip Strut, 14 gauge

Manufacturer Resources

Product Specs

Application:
Safe, sturdy footing where non-slip is required
Channel Size:
2.5"
Compliances:
OSHA Compliant
Material Gauge:
14 gauge
Product Height:
2.5 in
Product Length Depth:
144 in
Product Weight:
2.8 lb
Product Width:
4.75 in
Department:
Electrical
Product Finish:
Mill-galvanized
Product Material:
Steel

B-LINE 22514 12 GL – Frequently Asked Questions

1) How deep is the channel on this Grip Strut plank, and how much clearance does it need under the walkway?
The plank has a 2.5 inch channel size and a 2.5 inch overall height, so the formed side channels hang 2.5 inches below the walking surface. Allow for that depth when you set support spacing or lay it over an existing frame, since the tread face sits 2.5 inches above whatever it bolts down to.
2) Is B-Line Grip Strut plank OSHA compliant for walkways and platforms?
Yes. The Grip Strut two diamond plank is listed as OSHA compliant and is made for safe, sturdy footing where a non-slip surface is required, which is why it shows up on catwalks, mezzanine walkways, platforms and stair treads in industrial plants.
3) Will mill-galvanized Grip Strut hold up outdoors or in a wash-down area?
The plank is 14 gauge steel with a mill-galvanized finish. Mill galvanizing is applied to the coil before forming, so the cut edges and pierced diamond openings are bare steel. That is fine for covered indoor industrial use and light exposure, but for constant weather, wash-down or corrosive process areas you want a hot-dip galvanized after fabrication or stainless plank instead.
4) What is the difference between two diamond Grip Strut plank and the wider three or four diamond planks?
The diamond count is how many rows of pierced, serrated diamond openings run across the tread face, which sets the width. This two diamond plank is 4.75 inches wide, sized for stair treads and narrow single-file walkways. Wider planks with more diamond rows cover more deck in a single piece for catwalks and platforms. The tread surface and the non-slip action are the same; you are choosing coverage width.
5) How do you cut and fasten Grip Strut plank in the field?
The plank is 14 gauge steel and cuts to length in the field with a portable band saw or abrasive chop saw; you then drill the 2.5 inch side channels to bolt or clip down to your supports. Anything you cut or drill exposes bare steel on a mill-galvanized part, so hit those edges with a cold galvanizing compound if the walkway sees any moisture. Fasteners and hold-down clips are not part of the plank and get ordered separately.
6) What part number do I order for the 144 inch mill-galvanized two diamond Grip Strut plank?
Order Eaton B-Line part number 22514 12 GL. That gets you the two diamond plank, 144 inch length, 4.75 inch width, 2.5 inch channel, 14 gauge mill-galvanized steel.
7) Can one person carry and set a 12 foot length of this Grip Strut plank?
Yes, it is a one-man piece. The 144 inch two diamond plank is listed at 2.8 lb, so the length is more of a handling problem than the weight. Watch the serrated diamond edges when you handle it, and wear gloves.
How fast can I get the B-LINE 22514 12 GL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 22514 12 GL come with a warranty?
Absolutely. The B-LINE 22514 12 GL is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 22514 12 GL?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 22514 12 GL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!