B-Line Eaton series ground mounted panel enclosure, 72" height, 12" length, 72" width, 4X, Hinged cover, 4XSFDQT enclosure, Ground mount, Large doubl

It's a NEMA 4X enclosure built from 304 stainless steel with a seamless poured in-place gasket, so it handles hosedown, corrosive atmospheres, and outdoor exposure. The 4X rating plus stainless construction is what you specify for food processing, wastewater, marine, and chemical areas where painted steel would rust out. It carries a UL 50 listing.

585.3 lb empty. That is a rigging job, not a two-man lift. Plan for a forklift or crane and a prepared pad, and factor the empty weight plus your panel, breakers, and wire into the foundation and anchoring. Stainless at this size gets heavy fast.

Large double door, hinged cover. On a 72 inch wide box the double door matters for access: each leaf swings clear in roughly half the space a single 72 inch door would need, which is what lets you open it in a tight aisle or between equipment. It also gives you full-width reach to the backpanel.

Both keep out hosedown water and windblown dust. The X adds corrosion resistance, which is why this one is 304 stainless rather than painted carbon steel. If the environment involves salt air, washdown chemicals, or process spray, the painted box will blister and rust at the seams and the 4X stainless will not. If it's a dry indoor electrical room, you're paying for protection you don't need.

Eaton B-Line part number 727212-4XSFDQT. The leading digits read out the size: 72 high, 72 wide, 12 deep. 4XSF designates the NEMA 4X stainless free-standing type, with the double door ground mount configuration.