You may also like
Eaton B-Line series group metering
Manufacturer Resources
Product Specs
- Amperage Rating:
- 200A
- Bypass:
- Lever
- Certifications:
- UL
- Cover Door Type:
- Ringless
- Degree Of Protection:
- 3
- Feed Type:
- Both
- Line Lug Size:
- 3/8”-16 UNC stud
- Load Lug Size:
- #6-350KCMIL & #10-1/0
- Mounting Method:
- Side
- Number Of Poles:
- 1
- Number Of Wires:
- 3
- Product Height:
- 60.25 IN
- Product Length Depth:
- 7.625 IN
- Product Weight:
- 251.019 LB
- Product Width:
- 46.5 IN
- Department:
- Electrical
- Product Finish:
- ANSI 61 paint
- Product Material:
- Galvanized steel
B-LINE VELMP20436CGRST5K9 – Frequently Asked Questions
1) What amperage and service configuration does the Eaton B-Line VELMP20436CGRST5K9 group metering panel handle?
It's a 200A group metering assembly wired for single-pole, 3-wire service. That makes it a single-phase 120/240V type arrangement rather than a three-phase setup, so confirm the incoming service matches before you set it.
2) Is the VELMP20436CGRST5K9 meter socket ringless or ring-type, and does it have a bypass?
Ringless cover door, with a lever bypass. Many utilities specify ringless sockets and require the lever bypass so the meter can be pulled without dropping the load, so match this against your utility's approved meter equipment list before ordering.
3) What size conductors will the lugs on the VELMP20436CGRST5K9 accept?
Load lugs take #6 through 350 KCMIL and #10 through 1/0. The line side is a 3/8 inch-16 UNC stud connection, so you'll need matching bolt-on terminals or lugs on your service conductors rather than a screw-clamp lug.
4) Is this Eaton B-Line meter stack suitable for outdoor installation on a multi-family building?
The enclosure is galvanized steel finished in ANSI 61 paint with a Type 3 degree of protection, which is the rainproof outdoor rating for wall-mounted service equipment. Fine for an exterior wall exposed to rain and windblown dust; if you need washdown or hosedown duty, that calls for a higher enclosure type.
5) Can this Eaton B-Line group metering panel be fed from the top or the bottom?
Feed type is listed as both, so the enclosure accepts either an overhead or underground service entrance. That flexibility matters on retrofits where the existing lateral comes in from below but the new riser is overhead.
6) What exact part number should I put on the purchase order for this Eaton group metering unit?
Order it as Eaton B-Line VELMP20436CGRST5K9. That single model covers the 200A, ringless, lever-bypass configuration described here, so there are no finish or size options to specify alongside it.
How fast can I get the B-LINE VELMP20436CGRST5K9 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE VELMP20436CGRST5K9 come with a warranty?
Absolutely. The B-LINE VELMP20436CGRST5K9 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE VELMP20436CGRST5K9?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE VELMP20436CGRST5K9 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.