You may also like
Eaton B-Line series hanging system
Manufacturer Resources
Product Specs
- Application:
- Install without drilling into existing structure
- Certifications:
- cULus Listed
- Product Height:
- 240 IN
- Product Weight:
- 2.624 LB
- Special Features:
- Asembly only ,no more sawing, filing,fixing nuts
- Wire Diameter Max:
- .062 IN
- Wire Length:
- 240 IN
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- Bolt M6 thread termination
- Product Model:
- KwikWire accessory features
- Product Details:
- Bolt M6 thread termination
B-LINE BKBM6-063-240K – Frequently Asked Questions
1) What does the B-Line BKBM6-063-240K KwikWire kit terminate in, and what can I thread it into?
It is a wire rope hanging kit with an M6 bolt thread termination on the end. That M6 male thread lets you land the hanger directly into an M6-tapped fitting, insert, or fixture hanger point without adapters. The other decisions (gripper, wire) come as part of the assembly.
2) Is the B-Line KwikWire BKBM6-063-240K hanger listed for electrical work?
It is cULus Listed, so it carries both US and Canadian listing recognition. That is the line inspectors typically look for when wire rope suspension is used for lighting and electrical support.
3) Can I use a KwikWire hanger instead of drilling anchors into the deck?
That is what this system is for. Eaton B-Line KwikWire is meant to install without drilling into the existing structure, so you hang from existing points rather than shooting new anchors. For contractors in occupied space or in a deck you are not allowed to penetrate, that is the reason to pick it over all-thread rod.
4) Do I need to cut threaded rod or add nuts to install this hanger?
No. The KwikWire assembly is designed to go in with no sawing, filing, or fixing of nuts. You attach the top end, pass the wire through the gripper, pull to height, and trim. That is the labor argument against rod and nut hanging on a long run of fixtures or cable tray.
5) How much does one BKBM6-063-240K kit weigh for shipping and takeoff?
A single kit weighs 2.624 lb. Worth knowing if you are pricing out a hundred hanger points on a job, since the wire length is what drives most of that mass.
How fast can I get the B-LINE BKBM6-063-240K delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BKBM6-063-240K come with a warranty?
Absolutely. The B-LINE BKBM6-063-240K is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BKBM6-063-240K?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BKBM6-063-240K from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.