You may also like
B-Line Eaton series imperial cable tray and ladder, 6" Height, 22.092" Length, 36" Width, Series 2-5 vertical outside bend, Aluminum, 45° Angle, 24" R
Model: BLN-6A-36-45VO24
Eaton B-Line series imperial cable tray and ladder, 6" Height, 22.092" Length, 36" Width, Series 2-5 vertical outside bend, Aluminum, 45° Angle, 24" Radius
B-LINE
$893.06
B-Line Eaton series imperial cable tray and ladder, 4" Height, 22.092" Length, 24" Width, Series 2-5 vertical outside bend, Aluminum, 45° Angle, 24" R
Model: BLN-4A-24-45VO24
Eaton B-Line series imperial cable tray and ladder, 4" Height, 22.092" Length, 24" Width, Series 2-5 vertical outside bend, Aluminum, 45° Angle, 24" Radius
B-LINE
$644.24
B-Line Eaton series imperial cable tray and ladder, 4" Height, 22.092" Length, 30" Width, Series 2-5 vertical outside bend, Aluminum, 45° Angle, 24" R
Model: BLN-4A-30-45VO24
Eaton B-Line series imperial cable tray and ladder, 4" Height, 22.092" Length, 30" Width, Series 2-5 vertical outside bend, Aluminum, 45° Angle, 24" Radius
B-LINE
$758.04
B-Line Eaton series imperial cable tray and ladder, 6" Height, 22.092" Length, 30" Width, Series 2-5 vertical outside bend, Aluminum, 45° Angle, 24" R
Model: BLN-6A-30-45VO24
Eaton B-Line series imperial cable tray and ladder, 6" Height, 22.092" Length, 30" Width, Series 2-5 vertical outside bend, Aluminum, 45° Angle, 24" Radius
B-LINE
$837.13
B-Line Eaton series imperial cable tray and ladder, 6" Height, 22.092" Length, 24" Width, Series 2-5 vertical outside bend, Aluminum, 45° Angle, 24" R
Model: BLN-6A-24-45VO24
Eaton B-Line series imperial cable tray and ladder, 6" Height, 22.092" Length, 24" Width, Series 2-5 vertical outside bend, Aluminum, 45° Angle, 24" Radius
B-LINE
$761.90
Eaton B-Line series imperial cable tray and ladder, 4" Height, 22.092" Length, 36" Width, Series 2-5 vertical outside bend, Aluminum, 45° Angle, 24" Radius
Manufacturer Resources
Product Specs
- Angle:
- 45°
- Certifications:
- UL Classified
- Product Height:
- 4 in
- Product Length Depth:
- 22.092 in
- Product Weight:
- 7.3 lb
- Product Width:
- 36 in
- Radius:
- 24 in
- Department:
- Electrical
- Product Type:
- Series 2-5 vertical outside bend
- Product Details:
- Series 2-5 vertical outside bend
- Product Material:
- Aluminum
B-LINE 4A-36-45VO24 – Frequently Asked Questions
1) What is a 45 degree vertical outside bend used for in a cable tray run?
A vertical outside bend carries the tray run over an obstruction or down from a higher elevation, with the bend turning away from the tray's load-carrying side. The B-Line 4A-36-45VO24 turns the run through 45 degrees on a 24 inch radius, so the cables stay within their bend radius as the run changes elevation. Use it where the run has to drop or climb rather than turn left or right, which is what a horizontal elbow handles.
2) How much length does this 45 degree bend add to my cable tray run layout?
Figure 22.092 inches of length for the fitting itself when you lay out the run. Subtract that from the straight section lengths on either side of the elevation change so the total run lands where the drawing says it should.
3) Is this cable tray bend UL rated?
The 4A-36-45VO24 is UL Classified. That is the listing most electrical inspectors look for when cable tray is used as an equipment grounding conductor or where the spec calls for classified tray, so it will satisfy a drawing that specifies UL Classified aluminum tray fittings.
4) Is a 24 inch radius bend big enough for large power cable?
The bend is formed on a 24 inch radius, which is the larger of the common tray fitting radii and is what you want when the run carries heavy power cable with a large minimum bending radius. Where the cable manufacturer's minimum bend radius exceeds 24 inches you need a larger radius fitting instead of this one.
5) Do splice plates and hardware come with this B-Line cable tray bend?
The 4A-36-45VO24 is the bend fitting on its own. Splice plates, connector hardware and any hangers or trapeze supports for the fitting are ordered separately, so add the splice sets for both ends when you quote the elevation change.
6) How heavy is this aluminum tray bend for a single installer to set?
7.3 lb. A 36 inch wide aluminum fitting at that weight is a one-man lift on a ladder or lift, which is the practical reason contractors run aluminum tray instead of steel on overhead work.
7) Can I use this aluminum tray fitting outdoors or in a damp plant environment?
Aluminum is the standard choice for damp, washdown and outdoor tray runs because it does not need a galvanized or painted coating to resist corrosion. This fitting is aluminum throughout. For heavy chemical exposure, spec a fiberglass or stainless run instead.
How fast can I get the B-LINE 4A-36-45VO24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-36-45VO24 come with a warranty?
Absolutely. The B-LINE 4A-36-45VO24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-36-45VO24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-36-45VO24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.