You may also like
B-Line Eaton series imperial cable tray and ladder, 4" Height, 23.598" Length, 36" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 36" R
Model: BLN-4A-36-30VO36
Eaton B-Line series imperial cable tray and ladder, 4" Height, 23.598" Length, 36" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 36" Radius
B-LINE
$954.79
B-Line Eaton series imperial cable tray and ladder, 4" Height, 23.598" Length, 30" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 36" R
Model: BLN-4A-30-30VO36
Eaton B-Line series imperial cable tray and ladder, 4" Height, 23.598" Length, 30" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 36" Radius
B-LINE
$916.21
B-Line Eaton series imperial cable tray and ladder, 6" Height, 23.598" Length, 12" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 36" R
Model: BLN-6A-12-30VO36
Eaton B-Line series imperial cable tray and ladder, 6" Height, 23.598" Length, 12" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 36" Radius
B-LINE
$821.70
B-Line Eaton series imperial cable tray and ladder, 6" Height, 23.598" Length, 36" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 36" R
Model: BLN-6A-36-30VO36
Eaton B-Line series imperial cable tray and ladder, 6" Height, 23.598" Length, 36" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 36" Radius
B-LINE
$1,067.83
B-Line Eaton series imperial cable tray and ladder, 4" Height, 23.598" Length, 24" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 36" R
Model: BLN-4A-24-30VO36
Eaton B-Line series imperial cable tray and ladder, 4" Height, 23.598" Length, 24" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 36" Radius
B-LINE
$794.69
Eaton B-Line series imperial cable tray and ladder, 4" Height, 23.598" Length, 12" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 36" Radius
Manufacturer Resources
Product Specs
- Angle:
- 30°
- Certifications:
- CSA
- Product Height:
- 4 in
- Product Length Depth:
- 23.598 in
- Product Weight:
- 6.194 lb
- Product Width:
- 12 in
- Radius:
- 36 in
- Department:
- Electrical
- Product Type:
- Series 2-5 vertical outside bend
- Product Details:
- Series 2-5 vertical outside bend
- Product Material:
- Aluminum
B-LINE 4A-12-30VO36 – Frequently Asked Questions
1) What does a 30 degree vertical outside bend do in a cable tray run?
A vertical outside bend carries the tray run over an obstruction or up a change in elevation, with the bend turning away from the cable side so the cables ride on the outside of the curve. This B-Line 4A-12-30VO36 fitting turns 30 degrees on a 36 inch radius, so it is the piece you use where a 12 inch wide ladder run has to pitch up or down 30 degrees rather than at a right angle. If your run drops away in the other direction, you want a vertical inside bend instead.
2) Why does the 36 inch radius matter when picking a cable tray bend?
The bend radius sets the minimum bending radius the cables in the tray will see. A 36 inch radius is the large-radius option, used where you are pulling heavy power feeders or large fiber and control cable that cannot be bent tight. It also decides how much room the fitting eats in the run: at 30 degrees on a 36 inch radius, this fitting measures 23.598 inches, which is the length you have to deduct from your straight sections on either side.
3) Is aluminum the right choice for this cable tray fitting, or should I use steel?
Aluminum is the usual pick for corrosion resistance and light handling weight: this fitting comes in at 6.194 lb, so one person can set it and bolt it up on a ladder or lift without help. It is the common choice for wastewater, coastal, food processing and general indoor/outdoor industrial work. Go to steel instead when the run needs higher load capacity over long spans or where the specification calls out steel tray.
4) Is this cable tray bend approved for Canadian projects?
The 4A-12-30VO36 vertical outside bend carries a CSA certification, so it is acceptable where Canadian Electrical Code work requires certified tray components.
5) Do splice plates come with this cable tray bend?
The order covers the 30 degree vertical outside bend itself. Splice plates, hardware and any hold-down or support clamps at the fitting are ordered separately, matched to the Series 2-5 aluminum tray you are joining it to.
6) What is the exact part number to order this B-Line 12 inch, 30 degree vertical outside bend?
Order Eaton B-Line part 4A-12-30VO36. The number reads across as 4 inch aluminum rail, 12 inch width, 30 degree vertical outside bend, 36 inch radius, which is a useful check when you are matching it against a drawing schedule.
How fast can I get the B-LINE 4A-12-30VO36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-12-30VO36 come with a warranty?
Absolutely. The B-LINE 4A-12-30VO36 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-12-30VO36?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-12-30VO36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.