Eaton B-Line series imperial cable tray and ladder, 4" Height, 27" Length, 36" Width, Series 2-5 vertical tee up, Aluminum, 24" Radius
Manufacturer Resources
Product Specs
- Certifications:
- CSA
- Product Height:
- 4 in
- Product Length Depth:
- 27 in
- Product Weight:
- 30.464 lb
- Product Width:
- 36 in
- Radius:
- 24 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Series 2-5 vertical tee up
- Product Details:
- Series 2-5 vertical tee up
- Product Material:
- Aluminum
- Product Length:
- 27 in
B-LINE 4A-36-VTU24 – Frequently Asked Questions
1) What does a vertical tee up fitting do in a cable tray run?
The B-Line 4A-36-VTU24 is a vertical tee up, so it takes a horizontal tray run and branches a second run upward out of it while the straight run continues. That is different from a vertical elbow, which turns the whole run up or down with no branch. Use the tee where you need to feed a riser or a tray at a higher elevation without breaking the main run.
2) How much clearance do I need above the tray for this vertical tee up?
Plan for the fitting's own footprint before you set the hangers. The 4A-36-VTU24 measures 4 x 27 x 36 inches with a 24 inch radius, so the 24 inch radius plus the branch leg is what governs the vertical space you have to leave clear above the main run. Tight ceiling cavities are where this fitting gets rejected on site.
3) Is this cable tray tee aluminum or steel, and where should aluminum be used?
Aluminum. That makes it a lighter fitting to set overhead and suits it to damp or corrosive environments where plain steel would need galvanizing or paint. If your spec calls for steel or stainless tray, this is not the matching fitting.
4) Does the B-Line 4A-36-VTU24 cable tray tee carry any agency certification?
It is CSA certified, which is what a Canadian project or a spec calling for CSA listed tray components will be looking for on the submittal.
5) What part number do I order for a 36 inch wide, 4 inch aluminum vertical tee up with a 24 inch radius?
Order B-Line part 4A-36-VTU24. The number reads as 4 inch aluminum, 36 inch width, vertical tee up, 24 inch radius, which is how the rest of the series 2-5 imperial fittings are coded too.
6) How much does this 36 inch cable tray vertical tee weigh for rigging and hanger sizing?
The fitting weighs 30.464 lb bare. Add your cable fill on top of that when you size the trapeze or rod supports on either side of the tee, since the branch point concentrates load.
How fast can I get the B-LINE 4A-36-VTU24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-36-VTU24 come with a warranty?
Absolutely. The B-LINE 4A-36-VTU24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-36-VTU24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-36-VTU24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.