B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$763.83
B-Line Eaton series imperial cable tray and ladder, 4" Height, 29.625" Length, 24" Width, Series 2-5 horizontal bend, Aluminum, 30° Angle, 36" Radius

B-Line Eaton series imperial cable tray and ladder, 4" Height, 29.625" Length, 24" Width, Series 2-5 horizontal bend, Aluminum, 30° Angle, 36" Radius

(No reviews yet) Write a Review

Model: 4A-24-30HB36
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$763.83
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 4" Height, 29.625" Length, 24" Width, Series 2-5 horizontal bend, Aluminum, 30° Angle, 36" Radius

Manufacturer Resources

Product Specs

Angle:
30°
Certifications:
CE
Product Height:
4 in
Product Length Depth:
29.625 in
Product Weight:
8.592 lb
Product Width:
24 in
Radius:
36 in
Department:
Electrical
Product Type:
Series 2-5 horizontal bend
Product Details:
Series 2-5 horizontal bend
Product Material:
Aluminum

B-LINE 4A-24-30HB36 – Frequently Asked Questions

1) What size cable tray does the B-Line 4A-24-30HB36 horizontal bend fit?
The Eaton B-Line 4A-24-30HB36 is built for 24 inch wide, 4 inch deep Series 2-5 aluminum tray. Both the width and the rail height have to match the straight sections it ties into, so run it only on 24 inch wide tray with 4 inch side rails.
2) How much space do I need to lay out a 30 degree cable tray bend with a 36 inch radius?
Plan for a fitting that turns the run 30 degrees on a 36 inch radius, with an overall length of 29.625 inches along the fitting. Set your straight section terminations back far enough that the bend drops in without forcing the rails, and confirm the 36 inch radius clears adjacent racks or structure through the sweep.
3) Why choose a 36 inch radius bend instead of a tighter one for a cable tray run?
Radius is a cable bend-radius decision, not just a layout one. A 36 inch radius fitting gives large power conductors and fiber a gentler sweep than a 12 or 24 inch radius bend, which is why it gets specified where the tray carries cable with a big minimum bending radius. If your cable is small and the space is tight, a shorter radius fitting in the same 24 inch width is the better fit.
4) Is this B-Line bend aluminum or steel, and does that matter for my environment?
It is aluminum. That keeps the fitting light, 8.592 lb for this 24 inch wide, 30 degree piece, which is one reason aluminum tray gets used on long overhead runs and in corrosion-prone areas. Aluminum and steel tray systems are not mixed in a single run, so if the existing tray is steel you want the steel equivalent instead.
5) Does the B-Line 4A-24-30HB36 come with splice plates and hardware?
The 4A-24-30HB36 is the horizontal bend fitting itself. Splice plates, connection hardware and any supports for the fitting are separate items and need to be ordered to match the Series 2-5 aluminum tray you are connecting to.
6) Is this a horizontal bend or can it be used to change elevation?
Horizontal only. A horizontal bend changes the direction of the run in the flat plane, turning 30 degrees here. Going up or down in elevation takes a vertical inside or outside riser fitting instead, not this part.
7) What is the exact part number to order this 24 inch, 30 degree B-Line cable tray bend?
Order Eaton B-Line part 4A-24-30HB36. The number reads as 4 inch aluminum rail, 24 inch width, 30 degree horizontal bend, 36 inch radius, which is how you confirm you have the right fitting against a tray schedule.
8) Does the B-Line Series 2-5 aluminum horizontal bend carry any certification?
It carries CE marking. That is the rating stated for this 24 inch Series 2-5 aluminum bend.
How fast can I get the B-LINE 4A-24-30HB36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-24-30HB36 come with a warranty?
Absolutely. The B-LINE 4A-24-30HB36 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-24-30HB36?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-24-30HB36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!