B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,548.87
B-Line Eaton series imperial cable tray and ladder, 4" Height, 30" Length, 30" Width, 30" and 18" Tray widths, Series 2-5 horizontal reducing tee, Alu

B-Line Eaton series imperial cable tray and ladder, 4" Height, 30" Length, 30" Width, 30" and 18" Tray widths, Series 2-5 horizontal reducing tee, Alu

(No reviews yet) Write a Review

Model: 4A-30-18-HT12
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,548.87
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 4" Height, 30" Length, 30" Width, 30" and 18" Tray widths, Series 2-5 horizontal reducing tee, Aluminum, 12" Radius

Manufacturer Resources

Product Specs

Certifications:
CE
Product Height:
4 in
Product Length Depth:
30 in
Product Weight:
18.03 lb
Product Width:
30 in
Radius:
12 in
Special Features:
30" & 18" Tray widths
Department:
Electrical
Product Group:
Conduit & Fittings
Product Subgroup:
Tees / Crosses
Product Type:
Series 2-5 horizontal reducing tee
Product Details:
Series 2-5 horizontal reducing tee
Product Material:
Aluminum

B-LINE 4A-30-18-HT12 – Frequently Asked Questions

1) What tray widths does the B-Line 4A-30-18-HT12 reducing tee connect?
The 4A-30-18-HT12 horizontal tee reduces between a 30 inch wide tray and an 18 inch wide tray, so it lets you branch a run down to a narrower tray without a separate reducer section. It is a Series 2-5 horizontal reducing tee with a 4 inch loading depth (rail height).
2) What bend radius does this B-Line horizontal reducing tee have, and why does it matter for my cable pull?
It is built on a 12 inch radius. That radius sets the minimum bend the conductors see as they turn out of the main run, so it needs to be at least the minimum bending radius of the largest cable you are pulling. If your cable spec calls for more than 12 inches, step up to a larger radius fitting rather than forcing the pull through this one.
3) Do I need a separate reducer if I use this B-Line tee between 30 inch and 18 inch cable tray?
No. The reduction is built into the tee itself, mating 30 inch and 18 inch tray widths in one fitting. A straight horizontal tee would need a reducer section added on the branch leg; this one saves that piece and the extra splice joint.
4) Is this B-Line tee aluminum or steel, and can I use it outdoors or in a corrosive area?
Aluminum. That is the usual pick where weight matters or where a steel tray would corrode, and it keeps the fitting light enough for one person to set on the run: the tee weighs 18.03 lb. If your project drawing calls for steel tray for load or grounding reasons, this fitting is not a substitute.
5) What are the overall dimensions of the B-Line 4A-30-18-HT12 tee for laying out the tray run?
The fitting measures 30 in (length/depth) by 30 in (width) with a 4 in height, on a 12 in radius. Lay that 30 by 30 footprint into your run before you fix hanger locations, since the branch takeoff consumes that full square.
6) Is this a horizontal or vertical cable tray fitting?
Horizontal. The 4A-30-18-HT12 turns the tray run in plan, branching flat off the main run. For a change in elevation you need a vertical inside or outside bend instead, not this fitting.
7) What is the exact part number to order this 30 inch to 18 inch aluminum reducing tee?
Order Eaton B-Line part 4A-30-18-HT12. The number reads out as 4 inch aluminum, 30 inch by 18 inch widths, horizontal tee, 12 inch radius, which matches the Series 2-5 spec exactly.
8) Does the Eaton B-Line 4A-30-18-HT12 tee carry any certification marking?
It is CE marked. That is the certification carried on this aluminum Series 2-5 reducing tee; if your submittal calls out a different listing agency, confirm against the spec on the drawing before it goes in the package.
How fast can I get the B-LINE 4A-30-18-HT12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-30-18-HT12 come with a warranty?
Absolutely. The B-LINE 4A-30-18-HT12 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-30-18-HT12?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-30-18-HT12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!