B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,379.14
B-Line Eaton series imperial cable tray and ladder, 4" Height, 31.188" Length, 36" Width, Series 2-5 vertical inside bend, Aluminum, 90° Angle, 24" Ra

B-Line Eaton series imperial cable tray and ladder, 4" Height, 31.188" Length, 36" Width, Series 2-5 vertical inside bend, Aluminum, 90° Angle, 24" Ra

(No reviews yet) Write a Review

Model: 4A-36-90VI24
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,379.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 4" Height, 31.188" Length, 36" Width, Series 2-5 vertical inside bend, Aluminum, 90° Angle, 24" Radius

Manufacturer Resources

Product Specs

Angle:
90°
Certifications:
CSA
Product Height:
4 in
Product Length Depth:
31.188 in
Product Weight:
13.7 lb
Product Width:
36 in
Radius:
24 in
Department:
Electrical
Product Type:
Series 2-5 vertical inside bend
Product Details:
Series 2-5 vertical inside bend
Product Material:
Aluminum

B-LINE 4A-36-90VI24 – Frequently Asked Questions

1) Does the B-Line 4A-36-90VI24 bend go up or down at the 90 degree turn?
It is a vertical inside bend, so it turns the tray run so the fitting curves toward the inside of the angle, keeping cable on the inside radius of the turn. The turn is a full 90 degrees on a 24 inch radius. If your run needs to break the other direction, you want the vertical outside bend of the same series instead, not this part.
2) What width and rail height of cable tray does the B-Line 4A-36-90VI24 vertical inside bend match up to?
It is built for 36 inch wide tray with a 4 inch rail height. Both the width and the side rail depth have to match the straight sections you are connecting, or the rails will not line up at the splice. The fitting itself measures 31.188 inches along its length.
3) Is this B-Line cable tray bend aluminum or steel?
Aluminum. That matters for two reasons on the job: it keeps the piece light at 13.7 pounds so a single installer can set it on the hangers, and it holds up in damp or corrosive areas where plain steel tray would need galvanizing or paint. Bond and ground it as part of the tray system the same as any metallic tray run.
4) Is the B-Line 4A-36-90VI24 cable tray fitting approved for Canadian projects?
It carries a CSA certification, which is what a Canadian inspector or a spec written to CSA will be looking for on tray fittings.
5) What part number do I order for a 36 inch wide, 4 inch deep aluminum 90 degree vertical inside bend?
The Eaton B-Line part is 4A-36-90VI24. The number reads out as it is built: 4 inch rail, aluminum, 36 inch width, 90 degree vertical inside, 24 inch radius. Give that number when you need to add matching fittings to an existing Series 2-5 tray run.
6) Does this B-Line bend come with splice plates or hardware to attach it to the straight tray?
The 4A-36-90VI24 is the bend fitting itself. Splice plates, connector hardware, and any hangers or supports at the transition are ordered separately, so check what the run needs before the crew gets on site.
7) How much does the 36 inch B-Line vertical inside bend weigh for handling and hanger loading?
13.7 pounds bare. A 36 inch wide fitting is awkward more than heavy, so plan the lift for size rather than weight, and remember the hanger spacing at a vertical transition still has to carry the cable fill, not just the fitting.
How fast can I get the B-LINE 4A-36-90VI24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-36-90VI24 come with a warranty?
Absolutely. The B-LINE 4A-36-90VI24 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-36-90VI24?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-36-90VI24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!