Eaton B-Line series imperial cable tray and ladder, 6" Height, 11.5" Length, 12" Width, 12" and 6" Tray widths, Series 2-5 right reducer, Aluminum
Manufacturer Resources
Product Specs
- Certifications:
- CSA
- Product Height:
- 6 in
- Product Length Depth:
- 11.5 in
- Product Weight:
- 3.3 lb
- Product Width:
- 12 in
- Special Features:
- 12" & 6" Tray widths
- Department:
- Electrical
- Product Type:
- Series 2-5 right reducer
- Product Details:
- Series 2-5 right reducer
- Product Material:
- Aluminum
- Product Length:
- 11.5 in
B-LINE 6A-12-RR06 – Frequently Asked Questions
1) What does the B-Line 6A-12-RR06 cable tray right reducer actually connect?
It transitions a 12 inch wide cable tray run down to a 6 inch wide run, with the offset taken on the right side. The two tray widths it joins are 12 inch and 6 inch, and it keeps the 6 inch tray rail height through the transition. Overall it measures 6 inch height, 11.5 inch length and 12 inch width.
2) Is the 6A-12-RR06 reducer a right-hand or left-hand offset, and does it matter?
It is a right reducer, so the straight side runs on the right and the offset is taken on the left as the tray narrows. That matters on a run that has to hold a wall line or clear an obstruction on one side. If your run needs the straight edge on the opposite side, you need the left reducer instead, not this part.
3) Will an aluminum cable tray reducer work on a steel tray run?
The 6A-12-RR06 is aluminum, and aluminum fittings are normally run with aluminum tray of the same series so the rail profile, splice hole pattern and bonding match. Mixing aluminum fittings into a steel run also puts dissimilar metals in contact at the splice. Match the fitting material to the tray you already have.
4) What is the exact part number to order this 12 inch to 6 inch right reducer?
Order Eaton B-Line part 6A-12-RR06. That is the Series 2-5 aluminum right reducer, 6 inch height, joining 12 inch tray to 6 inch tray.
5) Do splice plates and hardware come with the B-Line 6A-12-RR06 reducer?
What is supplied is the reducer fitting itself, 11.5 inches long in aluminum. Splice plates and the bolt and nut sets that tie it to the adjoining 12 inch and 6 inch tray sections are ordered separately, so count two splice connections per reducer when you build the material list.
6) How much does the B-Line 6A-12-RR06 tray reducer weigh for overhead support planning?
3.3 lb. Being aluminum it is light enough for one person to hold in place at height while the splice plates go on, and it adds almost nothing to the hanger loading on an 11.5 inch section of run.
How fast can I get the B-LINE 6A-12-RR06 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-12-RR06 come with a warranty?
Absolutely. The B-LINE 6A-12-RR06 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-12-RR06?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-12-RR06 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.