B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$731.04
B-Line Eaton series imperial cable tray and ladder, 6" Height, 20.625" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 30° Angle, 12" Radius

B-Line Eaton series imperial cable tray and ladder, 6" Height, 20.625" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 30° Angle, 12" Radius

(No reviews yet) Write a Review

Model: 6A-36-30HB12
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$731.04
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 6" Height, 20.625" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 30° Angle, 12" Radius

Manufacturer Resources

Product Specs

Angle:
30°
Certifications:
UL Classified
Product Height:
6 in
Product Length Depth:
20.625 in
Product Weight:
7.6 lb
Product Width:
36 in
Radius:
12 in
Department:
Electrical
Product Type:
Series 2-5 horizontal bend
Product Details:
Series 2-5 horizontal bend
Product Material:
Aluminum
Product Length:
20.625 in

B-LINE 6A-36-30HB12 – Frequently Asked Questions

1) Will the Eaton B-Line 6A-36-30HB12 horizontal bend fit my 36 inch wide, 6 inch deep ladder tray run?
Yes, that is exactly what it is sized for. The 6A-36-30HB12 is a Series 2-5 horizontal bend built at 36 inch width and 6 inch height, so it matches a 36 inch wide, 6 inch deep straight ladder section from the same aluminum imperial series. Width and depth both have to match the straight run, not just the width.
2) How many degrees does this B-Line cable tray bend turn, and what is the inside radius?
It turns 30 degrees on a 12 inch radius. That is the tighter of the common tray radii, so check your largest conductor's minimum bending radius before you commit to 12 inch; a larger radius fitting is the answer if your cable cannot make that turn.
3) Is this cable tray bend aluminum or steel?
Aluminum. For an electrical contractor that means no field painting for corrosion resistance in most indoor and covered outdoor runs, and a much lighter lift, this fitting is 7.6 lb. Aluminum tray also needs a separate equipment grounding conductor sized per code where the tray itself is not used as the ground path.
4) Is the Eaton B-Line 6A-36-30HB12 bend UL listed for use in a cable tray system?
It is UL Classified. That is the rating stated for this Series 2-5 aluminum horizontal bend, which is what most specs and inspectors look for on tray fittings.
5) How much length does a 30 degree 36 inch wide tray bend add to my run?
The fitting measures 20.625 inches in its length dimension, so allow roughly that much space in the layout for the turn plus your splice plates at each end. On a 36 inch wide tray the bend also sweeps well outside the straight run centerline, so confirm clearance to walls and adjacent trades before hanging supports.
6) Do splice plates and hardware come with this B-Line horizontal bend?
The 6A-36-30HB12 is supplied as the bend fitting itself. Splice plates, connection hardware, and the hangers or trapeze supports for the turn are ordered separately, and you will want a support on each side of the bend rather than relying on the straight sections to carry it.
7) What is the difference between a horizontal bend and a vertical inside or outside bend on cable tray?
A horizontal bend like the 6A-36-30HB12 turns the run left or right while staying at the same elevation. If you need to change elevation, going up over a duct or dropping down to a panel, that is a vertical inside or outside bend instead, and the two are not interchangeable. This one is the flat turn, 30 degrees on a 12 inch radius.
How fast can I get the B-LINE 6A-36-30HB12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-36-30HB12 come with a warranty?
Absolutely. The B-LINE 6A-36-30HB12 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-36-30HB12?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-36-30HB12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!