B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4,438.31
B-Line Eaton series imperial cable tray and ladder, 6" Height, 27" Length, 36" Width, Series 2-5 vertical tee down, Aluminum, 24" Radius

B-Line Eaton series imperial cable tray and ladder, 6" Height, 27" Length, 36" Width, Series 2-5 vertical tee down, Aluminum, 24" Radius

(No reviews yet) Write a Review

Model: 6A-36-VT24
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4,438.31
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 6" Height, 27" Length, 36" Width, Series 2-5 vertical tee down, Aluminum, 24" Radius

Manufacturer Resources

Product Specs

Certifications:
CSA
Product Height:
6 in
Product Length Depth:
27 in
Product Weight:
42.4 lb
Product Width:
36 in
Radius:
24 in
Department:
Electrical
Product Group:
Conduit & Fittings
Product Subgroup:
Tees / Crosses
Product Type:
Series 2-5 vertical tee down
Product Details:
Series 2-5 vertical tee down
Product Material:
Aluminum

B-LINE 6A-36-VT24 – Frequently Asked Questions

1) What does the B-Line 6A-36-VT24 vertical tee down actually do in a cable tray run?
It is a three-way fitting that takes a horizontal cable tray run and drops a branch vertically downward while the main run continues straight through. B-Line calls it a Series 2-5 vertical tee down. Use it where you need to feed a panel, equipment drop, or lower tier off a ceiling-level tray without breaking the main run.
2) How much vertical and horizontal space do I need to install a 36 inch B-Line vertical tee down?
Plan for 27 inches of length along the run and 36 inches across, with 6 inch rails. The 24 inch radius is what drives that 27 inch dimension, so in a tight ceiling plenum or against a wall you need to confirm the drop has clearance before the tray is hung.
3) Is this B-Line cable tray tee aluminum or steel, and can it go outdoors?
Aluminum. That is the usual choice for exterior, damp, and corrosive industrial areas because it will not rust like plain steel tray, and it keeps the fitting light enough for one installer to set. If your project drawing calls out hot dip galvanized steel or stainless, this is not the matching fitting.
4) Does the B-Line 6A-36-VT24 carry any agency certification for a spec job?
It is CSA certified, which is what most Canadian jurisdictions and a lot of institutional specs ask to see on cable tray fittings. That is the certification carried on this part.
5) What is the part number to order the 36 inch aluminum vertical tee down with 24 inch radius?
Order B-Line 6A-36-VT24. The number reads out as 6 inch rail, aluminum, 36 inch width, vertical tee down, 24 inch radius, which is a quick way to check you have the right fitting against the tray already on site.
6) Should I use a vertical tee down or a vertical elbow on my cable tray drop?
Use a vertical tee down when the main run has to keep going straight past the drop point and you only want to branch part of the cable downward. A vertical elbow ends the run and turns the whole thing down. The 6A-36-VT24 is the tee version, so it gives you three openings: in, straight through, and down on a 24 inch radius.
7) How much does the B-Line 6A-36-VT24 tee weigh for hanging and support calculations?
42.4 lb for the fitting itself. Add that to your cable load when you size the trapeze or rod supports at the tee, and remember a vertical tee usually wants a support close to each side of the fitting rather than relying on the adjoining straight sections.
How fast can I get the B-LINE 6A-36-VT24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-36-VT24 come with a warranty?
Absolutely. The B-LINE 6A-36-VT24 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-36-VT24?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-36-VT24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!