B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$837.13
B-Line Eaton series imperial cable tray and ladder, 6" Height, 30.0625" Length, 6" Width, Series 2-5 horizontal bend, Aluminum, 90° Angle, 24" Radius

B-Line Eaton series imperial cable tray and ladder, 6" Height, 30.0625" Length, 6" Width, Series 2-5 horizontal bend, Aluminum, 90° Angle, 24" Radius

(No reviews yet) Write a Review

Model: 6A-06-90HB24
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$837.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 6" Height, 30.0625" Length, 6" Width, Series 2-5 horizontal bend, Aluminum, 90° Angle, 24" Radius

Manufacturer Resources

Product Specs

Angle:
90°
Certifications:
CSA
Product Height:
6 in
Product Length Depth:
30.0625 in
Product Weight:
11.9 lb
Product Width:
6 in
Radius:
24 in
Department:
Electrical
Product Type:
Series 2-5 horizontal bend
Product Details:
Series 2-5 horizontal bend
Product Material:
Aluminum

B-LINE 6A-06-90HB24 – Frequently Asked Questions

1) Will the B-Line 6A-06-90HB24 horizontal bend match a 6 inch wide aluminum ladder tray run?
Yes. The 6A-06-90HB24 is a Series 2-5 horizontal bend built for a 6 inch wide tray with a 6 inch side rail height, in aluminum. If your straight sections are 6 inch load depth and 6 inch inside width aluminum ladder tray, this bend keeps the same rail profile through the turn.
2) What radius does this 90 degree cable tray bend turn on, and why does that matter for my cable?
It turns on a 24 inch radius through a full 90 degree change of direction. Radius is the spec that governs cable bending on the turn, so if your cable schedule calls for a minimum bend radius above 24 inches, you need a larger radius fitting instead of this one. Under that, the 24 inch sweep works.
3) How much space do I need to lay out for this 90 degree bend on the drawing?
Plan for a 30-1/16 inch overall length on the fitting, with a 24 inch radius sweep. That length is what you deduct from your straight sections on each leg of the turn when you lay out the run.
4) Is this cable tray bend aluminum or steel, and is it suitable for a corrosive or outdoor area?
Aluminum. That is the lighter, corrosion-resistant choice for exterior runs, wash-down areas, and coastal or chemical plants where painted steel tray would need coating maintenance. If your spec sheet calls for steel or galvanized tray, this fitting is not a match, since the fitting material should follow the straight sections.
5) Is the Eaton B-Line 6A-06-90HB24 tray fitting certified for Canadian jobs?
It carries CSA certification, which is what an inspector on a Canadian project will look for on the tray system.
6) What is the exact part number to order this 6 inch 90 degree aluminum tray bend?
Order Eaton B-Line part number 6A-06-90HB24. Read it as 6 inch load depth aluminum, 6 inch width, 90 degree horizontal bend, 24 inch radius. Splice plates and hardware to join it to the straight sections are ordered separately.
7) How heavy is a 6 inch aluminum 90 degree tray bend for handling and hanging overhead?
It weighs 11.9 lb, light enough for one electrician to set into place on a lift, which is the practical reason aluminum tray gets specified on long overhead runs.
8) Do I need supports on both sides of this horizontal bend?
Treat the bend as its own supported element. With a 30-1/16 inch overall length and 24 inch radius, most tray installs hang a support on each straight section close to the connection points at either end of the fitting rather than relying on the straights to carry it. Follow the support spacing on your tray system's load table.
How fast can I get the B-LINE 6A-06-90HB24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-06-90HB24 come with a warranty?
Absolutely. The B-LINE 6A-06-90HB24 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-06-90HB24?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-06-90HB24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!