B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2,723.53
B-Line Eaton series imperial cable tray and ladder, 6" Height, 42" Length, 30" Width, 30" and 24" Tray widths, Series 2-5 horizontal reducing tee, Alu

B-Line Eaton series imperial cable tray and ladder, 6" Height, 42" Length, 30" Width, 30" and 24" Tray widths, Series 2-5 horizontal reducing tee, Alu

(No reviews yet) Write a Review

Model: 6A-30-24-HT24
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2,723.53
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 6" Height, 42" Length, 30" Width, 30" and 24" Tray widths, Series 2-5 horizontal reducing tee, Aluminum, 24" Radius

Manufacturer Resources

Product Specs

Certifications:
UL Classified
Product Height:
6 in
Product Length Depth:
42 in
Product Weight:
39.6 lb
Product Width:
30 in
Radius:
24 in
Special Features:
30" & 24" Tray widths
Department:
Electrical
Product Group:
Conduit & Fittings
Product Subgroup:
Tees / Crosses
Product Type:
Series 2-5 horizontal reducing tee
Product Details:
Series 2-5 horizontal reducing tee
Product Material:
Aluminum

B-LINE 6A-30-24-HT24 – Frequently Asked Questions

1) What tray widths does the B-Line 6A-30-24-HT24 reducing tee connect?
The Eaton B-Line 6A-30-24-HT24 horizontal reducing tee joins a 30 inch wide run to a 24 inch wide branch, so it is the fitting you use where the tray steps down in width at a horizontal tee. Overall width of the fitting is 30 inches and it is built on a 24 inch radius.
2) Will this B-Line reducing tee match my 6 inch deep cable tray?
Yes, it is a 6 inch load depth fitting, matching Series 2-5 tray with a 6 inch side rail height. If your run is 3, 4 or 5 inch deep tray, this tee will not line up at the splice.
3) Does the B-Line 6A-30-24-HT24 cable tray fitting carry any UL listing?
It is UL Classified. That is the rating an electrical inspector or an institutional spec reviewer will be looking for on aluminum cable tray fittings used as an equipment grounding path in the run.
4) How much room do I need to fit a 24 inch radius horizontal tee into the run?
Plan for 42 inches along the length of the fitting, with 30 inches across the wide side. The 24 inch bend radius is what drives that footprint, so it needs more clear space than a short radius fitting. Lay it out before you cut the straight sections either side.
5) Is the 6A-30-24-HT24 tee aluminum or steel?
Aluminum. That keeps the weight down for overhead work, it is a corrosion resistant choice for damp or coastal plants, and it means you should keep your hardware and supports compatible with aluminum tray rather than mixing in bare steel at the connection.
6) How heavy is this B-Line horizontal reducing tee for rigging and support spacing?
It weighs 39.6 lb, which is a two-hand lift on a lift or scaffold. Support it as you would any fitting of that footprint, with hangers near each connection point rather than letting the tee cantilever off one splice.
7) Should I use a reducing tee or a straight tee with a separate reducer?
A reducing tee does both jobs in one piece: the 6A-30-24-HT24 takes the 30 inch run and turns off a 24 inch branch in a single fitting, so you have fewer splice points and no short filler section between a tee and a reducer. Use the separate approach only when the width change has to happen somewhere other than at the intersection.
8) Is this fitting for a horizontal branch or a vertical drop?
Horizontal only. It is a horizontal reducing tee, meaning the branch runs off in the same plane as the main tray. For a change in elevation you need a vertical inside or outside bend instead.
How fast can I get the B-LINE 6A-30-24-HT24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-30-24-HT24 come with a warranty?
Absolutely. The B-LINE 6A-30-24-HT24 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-30-24-HT24?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-30-24-HT24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!