You may also like
B-Line Eaton series imperial cable tray and ladder, 6" Height, 57" Length, 36" Width, Series 2-5 horizontal tee, Aluminum, 36" Radius
Model: BLN-6A-36-HT36
Eaton B-Line series imperial cable tray and ladder, 6" Height, 57" Length, 36" Width, Series 2-5 horizontal tee, Aluminum, 36" Radius
B-LINE
$3,714.24
B-Line Eaton series imperial cable tray and ladder, 6" Height, 42" Length, 30" Width, Series 2-5 horizontal tee, Aluminum, 24" Radius
Model: BLN-6A-30-HT24
Eaton B-Line series imperial cable tray and ladder, 6" Height, 42" Length, 30" Width, Series 2-5 horizontal tee, Aluminum, 24" Radius
B-LINE
$2,725.49
B-Line Eaton series imperial cable tray and ladder, 6" Height, 69" Length, 36" Width, Series 2-5 horizontal tee, Aluminum, 48" Radius
Model: BLN-6A-36-HT48
Eaton B-Line series imperial cable tray and ladder, 6" Height, 69" Length, 36" Width, Series 2-5 horizontal tee, Aluminum, 48" Radius
B-LINE
$5,200.21
B-Line Eaton series imperial cable tray and ladder, 6" Height, 36" Length, 18" Width, Series 2-5 horizontal tee, Aluminum, 24" Radius
Model: BLN-6A-18-HT24
Eaton B-Line series imperial cable tray and ladder, 6" Height, 36" Length, 18" Width, Series 2-5 horizontal tee, Aluminum, 24" Radius
B-LINE
$2,090.89
B-Line Eaton series imperial cable tray and ladder, 6" Height, 54" Length, 30" Width, Series 2-5 horizontal tee, Aluminum, 36" Radius
Model: BLN-6A-30-HT36
Eaton B-Line series imperial cable tray and ladder, 6" Height, 54" Length, 30" Width, Series 2-5 horizontal tee, Aluminum, 36" Radius
B-LINE
$3,479.67
Eaton B-Line series imperial cable tray and ladder, 6" Height, 42" Length, 6" Width, Series 2-5 horizontal tee, Aluminum, 36" Radius
Manufacturer Resources
Product Specs
- Certifications:
- CE
- Product Height:
- 6 in
- Product Length Depth:
- 42 in
- Product Weight:
- 31.9 lb
- Product Width:
- 6 in
- Radius:
- 36 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Series 2-5 horizontal tee
- Product Details:
- Series 2-5 horizontal tee
- Product Material:
- Aluminum
- Product Length:
- 42 in
B-LINE 6A-06-HT36 – Frequently Asked Questions
1) What size cable tray does the B-Line 6A-06-HT36 horizontal tee fit?
The Eaton B-Line 6A-06-HT36 is a Series 2-5 horizontal tee built for 6 inch wide tray with a 6 inch loading depth (height). Both the width and the height are 6 inches, so it mates to straight sections of the same 6 inch width and 6 inch rail height. Run it on a tray of a different width and the side rails will not line up.
2) What bend radius is the 6A-06-HT36 tee, and why does that matter for my cable pulls?
It is a 36 inch radius fitting. That is the largest of the common tray radii, and it is what you specify when the cables in the run have a large minimum bending radius, typically medium voltage or big multi-conductor power feeders. If your run is control or instrumentation cable, a tighter radius tee takes up far less ceiling space. The 36 inch radius also drives the fitting's overall 42 inch length, so allow for that footprint at the branch point before you set your supports.
3) Is this B-Line cable tray tee aluminum or steel?
Aluminum. That keeps the weight down for overhead work and suits indoor and most outdoor runs where steel would need galvanizing. It also means the fitting will not match a steel tray system on corrosion behavior or on splice hardware, so keep the run in one material.
4) How much does the 6A-06-HT36 tray tee weigh for rigging and support planning?
31.9 lb for the fitting itself, before any cable load. At 42 inches long it is a two-hand lift on a lift or scaffold, and it needs support on each of the three legs where it connects into the straight runs.
5) What does a horizontal tee do in a cable tray run, and when would I use a cross instead?
A horizontal tee branches one tray run into two in the same flat plane, giving you a three-way junction. Use a cross instead when the run has to split four ways at one point. If the branch has to go up or down rather than sideways, that is a vertical elbow or a horizontal-to-vertical transition, not this fitting. The 6A-06-HT36 handles the flat three-way case only.
6) What is the exact part number to order this 6 inch aluminum 36 inch radius tee?
Order Eaton B-Line part number 6A-06-HT36. The number breaks down as the 6 inch Series 2-5 aluminum tray, 6 inch width, horizontal tee, 36 inch radius. It is a single configuration, so there are no finish or length options to specify with it.
7) Does the B-Line 6A-06-HT36 tee carry any certification marking?
It is CE marked. No other listing or marking is carried on this fitting.
How fast can I get the B-LINE 6A-06-HT36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-06-HT36 come with a warranty?
Absolutely. The B-LINE 6A-06-HT36 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-06-HT36?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-06-HT36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.