You may also like
Eaton B-Line series imperial cable tray and ladder
Manufacturer Resources
Product Specs
- Angle:
- 30°
- Certifications:
- UL Classified
- Product Height:
- 6 IN
- Product Length Depth:
- 29.598 IN
- Product Weight:
- 7.4 LB
- Product Width:
- 6 IN
- Radius:
- 48 IN
- Department:
- Electrical
- Product Type:
- Series 2-5 vertical outside bend
- Product Details:
- Series 2-5 vertical outside bend
- Product Material:
- Aluminum
B-LINE 6A-06-30VO48 – Frequently Asked Questions
1) What does the B-Line 6A-06-30VO48 cable tray fitting actually do in a tray run?
It is a Series 2-5 vertical outside bend, the fitting that carries a ladder tray run over an obstruction or up a wall face, bending the run 30 degrees on a 48 inch radius. Outside bend means the tray turns away from the cable side, so cable pulls over the convex face of the fitting. It is aluminum, 6 inches wide and 6 inches deep, and weighs 7.4 lb.
2) Is this an outside bend or an inside bend, and how do I tell which one I need?
This is a vertical OUTSIDE bend. Use it where the tray run rises and turns away from the cable, for example cresting over a beam or a duct. If the run drops away and the cable rides on the inside of the turn, you need a vertical inside bend instead. Ordering the wrong one is the most common mistake on vertical offsets, and the two are not interchangeable.
3) How much space does this bend take up in the run, and does it change my straight section lengths?
The fitting measures 29.598 in along its length, so you lose roughly two and a half feet of run to the bend itself and cut or order straight sections around it. Lay the 48 in radius sweep out on the drawing before ordering straights, because the takeoff on a large-radius bend is what usually throws a tray layout off.
4) What is the exact part number to order this 6 inch 30 degree vertical outside bend?
Order Eaton B-Line part 6A-06-30VO48. The number reads out as its own spec: 6A for the 6 inch aluminum series, 06 for the 6 inch depth, 30VO for a 30 degree vertical outside bend, and 48 for the 48 in radius.
5) Is aluminum cable tray fitting OK for a corrosive or outdoor area?
The 6A-06-30VO48 is aluminum, which is the usual choice where weight matters and where steel would need galvanizing, including damp and many mildly corrosive indoor and outdoor locations. It also keeps the handling weight down, 7.4 lb for this fitting. Keep the whole run in the same material family so you are not mixing aluminum fittings into a steel tray system.
6) Does the bend come with splice plates and hardware?
The 6A-06-30VO48 is the bend fitting itself. Splice plates, hardware, and the supports or hangers that carry the fitting through the turn are separate line items on a Series 2-5 tray system, so add them to the order along with the straight sections on either side.
How fast can I get the B-LINE 6A-06-30VO48 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-06-30VO48 come with a warranty?
Absolutely. The B-LINE 6A-06-30VO48 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-06-30VO48?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-06-30VO48 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.