You may also like
Eaton B-Line series imperial cable tray and ladder
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Product Height:
- 4 IN
- Product Length Depth:
- 30 IN
- Product Weight:
- 18.609 LB
- Product Width:
- 6 IN
- Radius:
- 24 IN
- Special Features:
- 6" & 12" Tray widths
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Series 2-5 horizontal expanding tee
- Product Details:
- Series 2-5 horizontal expanding tee
- Product Material:
- Aluminum
B-LINE 4A-06-12-HT24 – Frequently Asked Questions
1) What tray widths does the B-Line 4A-06-12-HT24 expanding tee connect?
It is a horizontal expanding tee built for 6 inch and 12 inch tray widths, so it lets a 6 inch run branch into or transition against 12 inch tray in the same fitting. The catalogued width figure on the fitting is 6 inches.
2) Is the B-Line 4A-06-12-HT24 tee aluminum or steel?
Aluminum. For an electrical contractor that means lighter handling on a lift and better corrosion behavior in damp or coastal environments than plain steel, and it needs to match the tray it bolts to so you are not mixing aluminum and galvanized steel at a splice.
3) How much does the 4A-06-12-HT24 tee weigh and how much room does it take on the run?
18.609 lb, and it measures 30 inches on its length dimension. Worth knowing both for a one-man lift overhead and for laying out hanger points, since a fitting this size usually wants support on each leg rather than relying on the adjoining tray sections.
4) Is this B-Line cable tray tee UL listed for a commercial electrical spec?
The 4A-06-12-HT24 is UL Classified. That is the designation to cite when the drawing or the facility spec calls for classified cable tray fittings; note it is UL Classified rather than a UL Listed mark.
5) Do I need a straight reducer if I'm going from 6 inch to 12 inch tray at a branch point?
Not if the transition happens at the tee. The 4A-06-12-HT24 is an expanding tee, meaning the width change and the branch are handled in one fitting across 6 inch and 12 inch tray. A separate reducer only comes into play where the width changes on a straight run with no branch.
6) Does this tee handle a vertical drop in the cable tray run?
No. This is a horizontal fitting, so it branches the run in the flat plane only. A change in elevation calls for a vertical inside or outside elbow at the matching 24 inch radius and 4 inch depth.
7) What is the manufacturer part number to order this Eaton B-Line tee?
Order it as Eaton B-Line 4A-06-12-HT24. The code reads out as the fitting spec itself: 4 inch depth, aluminum, 6 inch by 12 inch widths, horizontal tee, 24 inch radius.
How fast can I get the B-LINE 4A-06-12-HT24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-06-12-HT24 come with a warranty?
Absolutely. The B-LINE 4A-06-12-HT24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-06-12-HT24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-06-12-HT24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.