B-Line 1084-12CHSC Eaton series JIC panel enclosure, 10" height, 4" length, 8" width, NEMA 12, Hinged cover, 12CHSC enclosure, Wall mount, Small single door, External mounting feet, Carbon steel, Oil resistant gasket

The 1084-12CHSC measures 10 inches high, 8 inches wide and 4 inches deep. Those are the enclosure body dimensions, so a panel sized to the full 10 x 8 opening will not drop in; the box has panel mounting provisions inside for a subpanel cut to fit within that envelope. The 4 inch depth is what governs how much breaker, relay or terminal block height you can stack on the panel.

No. NEMA 12 is an indoor rating. It covers falling dirt, circulating dust, lint, fibers and dripping or light splashing of non-corrosive liquids, which is why the 1084-12CHSC carries an oil resistant gasket and is common on machine tool and JIC control panels. For outdoor exposure or hose-down washdown you need a NEMA 4 or 4X enclosure instead, and in a corrosive or food-processing environment a stainless 4X, since this box is painted carbon steel.

It mounts to a wall on external mounting feet, so the fasteners go through brackets outside the enclosure rather than through the back wall. That keeps the NEMA 12 seal intact, which drilling the back panel would break. At 6.6 pounds empty, standard anchors into block, or screws into studs or Unistrut, carry it fine.

Yes. The 1084-12CHSC is recognized to UL 508A, the standard for industrial control panels, so a panel shop can build inside it and still label the finished assembly to 508A. Pair that with the NEMA 12 rating and the oil resistant gasket and it is the usual choice for machine-mounted control and operator stations.

Hinged, on a continuous piano hinge, so the door swings clear instead of having to be lifted off and set down while you work. For a small single door box mounted in a tight spot on a machine that matters, since there is no loose cover to juggle. It closes on plated screws against the gasket.

It ships painted in ANSI 61 grey, the standard light grey used across most industrial control enclosures, so it lines up with existing Eaton B-Line and most other manufacturers' panels on the same machine. The shell is 16 gauge carbon steel under the paint.

Yes, country of origin on the Eaton B-Line 1084-12CHSC is the United States, which is what government, transit and other Buy American funded jobs usually need documented at submittal.