You may also like
Eaton B-Line series JIC panel enclosure
Manufacturer Resources
Product Specs
- Certifications:
- UL 50
- Closure Type:
- Hinged
- Country Of Origin:
- United States
- Cover Type:
- Hinged
- Finish Color:
- #4 brushed
- Mounting Hole Details:
- External mounting feet
- Nema Rating:
- 4X
- Product Height:
- 12 IN
- Product Length Depth:
- 6 IN
- Product Weight:
- 4.9 LB
- Product Width:
- 10 IN
- Special Features:
- Cont. piano hinge,panel mount prov.,s.s.doorclamps
- Wall Thickness:
- 14 gauge
- Department:
- Electrical
- Product Model:
- 4XACHC enclosure
- Product Color:
- Grey
- Mounting Method:
- Wall
- Product Style:
- Small single door
- Product Material:
- Aluminum
- Product Length:
- 6 in
B-LINE 12106-4XACHC – Frequently Asked Questions
1) Will the B-Line 12106-4XACHC enclosure hold up in a washdown or outdoor area?
It carries a NEMA 4X rating, so it is built for hose-down, wet and corrosive locations, not just dry indoor panels. The body is aluminum with a #4 brushed finish, which is why the 4X corrosion rating applies without a painted coating to chip. It is UL 50 listed.
2) What are the actual box dimensions of the 12106-4XACHC JIC enclosure?
12 inches high, 10 inches wide, 6 inches deep. That 6 inch depth is what decides whether your drive, contactor stack or terminal blocks clear the door, so measure your deepest component plus wire bend space before committing. Weight is 4.9 lb, light enough for one person to hang.
3) How does the 12106-4XACHC mount, and can I surface mount it without drilling the box?
It mounts to a wall on external mounting feet. Because the feet sit outside the enclosure body, you never drill the back wall, so the NEMA 4X seal stays intact. That matters on any washdown or exterior wall where a through-hole would let water in.
4) Is the door on this JIC enclosure hinged or a lift-off cover?
Hinged, on a continuous piano hinge running the full door height, and secured with stainless steel door clamps rather than screws. You can open it one-handed in the field without losing hardware, and the clamps let you re-seal against the gasket surface at the same clamping pressure each time.
5) What gauge is the metal on the B-Line 12106-4XACHC, and is it heavy enough for a machine-mounted control box?
14 gauge aluminum throughout. That is the standard JIC wall thickness for industrial control enclosures and it will take punching for conduit hubs and pilot devices without deforming. Aluminum rather than steel also keeps the total weight to 4.9 lb.
6) Is the Eaton B-Line 12106-4XACHC made in the USA?
Country of origin is the United States. If you are buying to a Buy American or domestic-preference clause on a government or institutional job, that is the line item procurement will want to see.
How fast can I get the B-LINE 12106-4XACHC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 12106-4XACHC come with a warranty?
Absolutely. The B-LINE 12106-4XACHC is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 12106-4XACHC?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 12106-4XACHC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.