You may also like
Eaton B-Line series mounting panels, Aluminum, Used with 30" X 24" enclosures, Flat panel for fiberglass enclosures
Manufacturer Resources
Product Specs
- Certifications:
- NEMA
- Finish Color:
- White powder coated
- Product Height:
- 27 in
- Product Length Depth:
- 21 in
- Product Weight:
- 5.885 lb
- Product Width:
- 21 in
- Special Features:
- Used with 30" X 24" enclosures
- Department:
- Electrical
- Product Material:
- Aluminum
B-LINE AW3024AP – Frequently Asked Questions
1) Which enclosure size does the B-Line AW3024AP mounting panel fit?
The AW3024AP aluminum back panel is made for 30 x 24 inch enclosures. The panel itself measures 27 inches high by 21 inches wide, which is the usual undersize so it clears the enclosure's welded mounting studs and sits flat on the back wall. If your box is a different size, this panel will not line up with the stud pattern.
2) Can I use this aluminum back panel in a fiberglass enclosure?
That is exactly what it is for. The AW3024AP is a flat panel intended for fiberglass enclosures, not a formed or offset panel. Because fiberglass is non-conductive, remember that an aluminum panel does not bond itself to anything, so any equipment grounding has to be run to the panel separately.
3) Is the B-Line AW3024AP panel aluminum or steel, and why does that matter?
It is aluminum, finished in white powder coat. Aluminum is the choice where weight and corrosion matter, wash-down areas, coastal sites, and outdoor fiberglass enclosures. The whole panel weighs 5.885 lb, so one person can hold it in place while starting the mounting nuts. Steel panels are heavier but take self-tapping screws and heavy DIN rail loads better.
4) What part number do I order for a 30x24 aluminum panel from Eaton B-Line?
Order AW3024AP. That is the Eaton B-Line catalog number for the aluminum flat mounting panel sized to 30 x 24 inch fiberglass enclosures, and it is the number to quote when matching panels across a run of identical boxes on a job.
5) Do mounting screws or standoffs come with this back panel?
The AW3024AP is sold as the panel alone. Fiberglass enclosures normally come with their own panel mounting hardware or welded studs, so check what shipped with the box before the truck rolls. Any DIN rail, wire duct, or component hardware is a separate order.
6) Is the mounting panel painted, or do I get bare aluminum?
It ships white powder coated. The white face makes wiring and component labels easier to read inside the box, and the coating has to be scraped or backed off with a star washer at any point you intend to use the panel as a bonding path.
7) Does the AW3024AP panel meet NEMA requirements?
The panel carries a NEMA certification. Keep in mind the enclosure rating (NEMA 4X and the like) comes from the box and gasket, not the back panel, so the panel does not change the rating of the enclosure it goes into.
How fast can I get the B-LINE AW3024AP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE AW3024AP come with a warranty?
Absolutely. The B-LINE AW3024AP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE AW3024AP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE AW3024AP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.