B-Line SB864812D066EW Eaton series open frame racks, 60.375" height, 3" length, 2.625" width, Aluminum, RCM rack mounted double sided vertical cable manager cover, Direct pdu mounting, Dual Density, White, Required number of gates

It's the cover assembly for a rack mounted double sided vertical cable manager in the Eaton B-Line RCM line, supplied with the required number of gates and the mounting hardware. Dual density style, white powder coat over aluminum with black plastic components. If you need the vertical manager channel itself, this is the cover side of that assembly, not a standalone manager.

The cover is 60.375 inches tall, so it suits a vertical manager run of that height, which pairs with a shorter open frame rack rather than a full 84 inch (45U) two post. On a taller frame you'd be leaving roughly two feet of the channel uncovered, so match the manager height before ordering.

Yes. The RCM assembly is set up for direct PDU mounting, so a vertical rack PDU fastens into the manager rather than eating rack units up front. That's the usual reason to choose this style over a plain finger duct.

It projects 3 inches deep and is 2.625 inches wide, so in a cold aisle or a tight cabinet row plan for those 3 inches beyond the manager face. That footprint matters most when you're measuring clearance to a wall, a door swing, or an adjacent cabinet.

No. The manager is open back, which lets cable pass through without a fixed exit point, and the cover uses gates so you can open sections and drop bundles in at any height instead of threading them end to end.

UL is the certification carried on the B-Line RCM cover, which is generally what a facilities or MRO spec asks for on rack infrastructure. No fire or seismic rating is part of that.

No. The required number of gates and the mounting hardware come with it, so nothing extra is needed to attach the cover. Rack PDUs, cable ties, and the manager channel itself are separate line items.

The cover is finished in Eaton white powder coat with black plastic components, so it matches white B-Line open frame racks and managers. Against black racks the contrast is obvious, so order the black version if you're standardizing a dark room.

It ships at 29.4 lb complete with gates and hardware. That's manageable for one installer at floor level, but hanging a five-foot aluminum cover on an already-populated rack goes easier with two.

Dual density is the style designation for the RCM double sided manager, meaning cable is carried on both the front and rear sides of the vertical channel so you can split patch runs from switch runs. The cover closes off that face, and it's ordered per side of the manager.