B-Line SB862810S072SL Eaton series open frame racks, 67.375" height, 7" length, 10" width, Aluminum, RCM rack mounted vertical cable manager single sided, Direct pdu mounting, Low density plastic gate, Silver powder coat

The SB862810S072SL is a full-height vertical manager at 67.375 inches tall, so it suits an open frame rack of roughly 7 foot class height. Its footprint is 10 inches wide by 7 inches deep, which is the channel space it will occupy alongside the rack rails. Measure the space beside your rack uprights against those numbers before you commit.

Yes, it is built for direct PDU mounting, so a vertical power strip attaches to the manager itself rather than eating rail space in the rack. That is the main reason to pick this version over a plain cable channel.

Single sided. The RCM rack mounted vertical cable manager in model SB862810S072SL manages cable on one face only, with a low density plastic gate closing the channel. If you need cable routed and retained on both the front and rear of the rack, a single sided unit on each face is the way to cover it.

It ships with the vertical cable section and push in fasteners for assembly. The plastic gate is part of the assembly. PDUs, rack screws, and any horizontal managers are separate items.

UL is the certification carried on this B-Line vertical cable manager. For a data room or telecom closet where the spec calls out listed pathway components, that is the rating on record.

Both. The RCM vertical manager is meant for routing cabling on and between racks, so it works as the vertical spine in a single frame or as the transition point in a lineup of ganged open frame racks.

Low density plastic gate means the channel and door are sized for lighter cable fill, typical of a patching frame carrying moderate copper counts rather than a high count main cross connect. If you are stacking dozens of bundles through one vertical run, a deeper or higher capacity channel is the better call; this 7 inch deep by 10 inch wide section suits a normal equipment rack load.

The finish is a silver powder coat over aluminum, with black plastic components such as the gate. Against a black rack the body will read as a contrast; against a silver or grey aluminum frame it blends.

Order by MPN SB862810S072SL, the Eaton B-Line RCM single sided vertical cable manager in silver. Quoting that number keeps height, gate style, and the PDU mounting provision identical across every rack you standardize.