B-Line SB86486D090SL Eaton series open frame racks, 84.875" height, 17.875" length, 6" width, Aluminum, RCM rack mounted double sided vertical cable manager cover, Direct pdu mounting, Low density plastic gate, Silver powder coat

At 84.875 inches tall, the SB86486D090SL cable manager matches the height of a 7-foot class open frame rack (84 inches nominal plus base), so it stands full height beside the rack rather than covering only part of the frame. Plan your aisle around a 6 inch wide by 17.875 inch deep footprint. If your racks are shorter, this manager will overhang them.

Yes. The SB86486D090SL is built for direct PDU mounting, so a vertical rack PDU attaches within the manager section instead of eating rack units in the frame. That is the main reason to pick this version over a plain cable manager, since it keeps power and cable in the same vertical channel.

The required number of gates and the mounting hardware ship with it, so you are not sourcing fingers or brackets as a separate line. The gates are the low density plastic style, which give wider spacing between fingers for larger cable bundles passing in and out of the channel.

UL is the certification carried on the SB86486D090SL, which is normally what a facilities or MRO spec asks for on rack and cable management hardware. Beyond that, no further agency listings are carried on the part.

Double sided. It manages cable on the front and rear faces of the vertical section, with covers on both, which is what you want between two open frame racks where patch cable runs forward and power and server cable runs to the rear. A single sided manager only finishes one face and is usually used at the end of a row.

It is a rack mounted section, so it fastens to the rack frame rather than standing free. Either position works as long as it is bolted to at least one rack upright, and the included mounting hardware handles the attachment. Routing through the manager is open and unrestricted by design, so cable can pass between bays without hard bend points.

The body is aluminum with a silver powder coat, and the gate and cover components are black plastic. If your existing open frame racks are black, this will read as a two-tone row, so match the finish across the aisle if appearance in a visible room matters. Aluminum also keeps the assembly to 30.1 lb, light enough for one person to stand up during install.