B-Line SB5868090UTG Eaton series open frame racks, Double sided, Steel, Telco gray powder coat, 12-24 panel mounting holes, 48 mounting spaces, Top angle style, Seismic Zone 4, network bay closed duct rack, ASTM A570 grade 33 steel

Yes. The SB5868090UTG is built as a Seismic Zone 4 network bay closed duct rack, so it is the version to specify where the drawing calls for Zone 4 anchoring. It is fabricated from ASTM A570 grade 33 steel and is UL Listed.

Plan the footprint around 23 in width, 90 in depth and 90 in height as stated for this rack. At 90 in tall it needs clear height for the top angle plus whatever your cable ladder or overhead runway adds, so check the slab-to-ladder dimension in the equipment room before it is delivered.

The rails are punched with 12-24 panel mounting holes, so panels and equipment mount with 12-24 rack screws. Patch panels, shelves and equipment ears drilled for 12-24 drop straight in; gear supplied for M6 or 10-32 will need a rail or hardware change. Order 12-24 screws and washers with the rack.

It provides 48 mounting spaces, which is the usable rack unit count for panels and active gear. That is the figure to use when you lay out switches, patch fields and rack-mount UPS units on a single bay.

Double sided means the bay is configured for equipment mounting from both faces rather than a single front-mount rail set, which is how network bays are typically built for back-to-back patch and equipment layouts in a telecom room. The style is top angle.

The rack weighs 125.23 lb bare. That is a two-person lift to stand up a 90 in bay, and anchoring hardware should be set before any equipment goes in the 48 mounting spaces.

An open frame bay like the SB5868090UTG suits a secured equipment or telecom room where you want full access to both faces and unrestricted airflow, and it is the closed duct network bay style used with overhead ladder rack. If the gear sits in a shared or public space, or you need locking doors and dust control, a fully enclosed cabinet is the better choice. This rack is a frame, not an enclosure.

The finish is a telco gray powder coat over steel, which is the standard color for central office and telecom equipment bays, so it will read the same as existing telco gray racks and ladder rack in the room.

Order it as Eaton B-Line SB5868090UTG. That single model covers the double sided, telco gray, 48 space Seismic Zone 4 closed duct network bay with 12-24 rails.