You may also like
Eaton B-Line series open frame racks
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Product Height:
- 96 IN
- Product Length Depth:
- 96 IN
- Product Weight:
- 120 LB
- Product Width:
- 19 IN
- Surface Finishing:
- Telco gray powder coat
- Department:
- Electrical
- Product Group:
- Racks & Frames
- Product Subgroup:
- Racks
- Product Type:
- Seiemic zone 4, network bay closed duct rack
- Product Details:
- Seiemic zone 4, network bay closed duct rack
- Product Material:
- Steel
B-LINE SB5463096TG – Frequently Asked Questions
1) Is the B-Line SB5463096TG rack rated for seismic zone 4 installations?
Yes. The SB5463096TG is a seismic zone 4 network bay closed duct rack, so it is built for the highest seismic zone classification used in data center and central office work. It is also UL Listed.
2) What are the dimensions of the B-Line SB5463096TG open frame rack?
The frame is 19 inches wide, 96 inches high, and 96 inches in length/depth, and it weighs 120 lb bare. The 19 inch width is the standard EIA rack mounting width, so standard 19 inch rack-mount network gear and patch panels land on it directly. Plan floor space and doorway clearance around the 96 inch figures before it arrives on site.
3) What is a closed duct network bay rack, and when would I use one instead of a plain open frame rack?
A closed duct bay integrates vertical cable duct into the rack uprights, so jumpers and patch cords are routed and contained inside the channel instead of hanging off open rails. That is what you want in a high-density cross-connect or central office frame where cord management and dressing matter. A plain open frame with no duct is cheaper and fine for a few switches in a small IDF, but it leaves cable management to add-on fingers and rings.
4) Can I anchor the B-Line SB5463096TG to a concrete slab for seismic compliance?
A seismic zone 4 bay is only rated when it is anchored per the manufacturer's installation detail, which means floor anchors into the slab and, in most bay installs, top bracing to overhead ladder rack or a wall. The rack itself only weighs 120 lb, so the anchorage, not the frame mass, is what carries the seismic load. Order the anchor hardware and any auxiliary framing channel separately.
5) Is the B-Line SB5463096TG UL Listed for a spec that requires listed equipment racks?
Yes, the SB5463096TG carries a UL Listing, which is what most institutional and government equipment room specs call out for network bays. Cite the model number SB5463096TG on the submittal.
6) Is the B-Line SB5463096TG steel or aluminum, and how is it finished?
Steel construction with a telco gray powder coat. That is the standard central office color, so it matches existing telco gray bays and ladder rack in an equipment room rather than standing out as black.
How fast can I get the B-LINE SB5463096TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5463096TG come with a warranty?
Absolutely. The B-LINE SB5463096TG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5463096TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5463096TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.