B-Line SB5769108TG Eaton serie...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4,791.30
B-Line SB5769108TG Eaton series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 50 mounting spaces, Top angle style, Seismic Zone 4, network bay open duct rack

B-Line SB5769108TG Eaton series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 50 mounting spaces, Top angle style, Seismic Zone 4, network bay open duct rack

(No reviews yet) Write a Review

Model: SB5769108TG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4,791.30
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 50 mounting spaces, Top angle style, Seismic Zone 4, network bay open duct rack

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Mounting Rails:
12-24 panel mounting holes
Product Height:
108 in
Product Length Depth:
108 in
Product Weight:
130 lb
Product Width:
23 in
Special Features:
50 mounting spaces
Surface Finish:
Telco gray powder coat
Department:
Electrical
Product Group:
Racks & Frames
Product Subgroup:
Racks
Product Type:
Seismic Zone 4, network bay open duct rack
Product Details:
Seismic Zone 4, network bay open duct rack
Product Style:
Top angle
Product Material:
Steel
Product Length:
108 in

B-LINE SB5769108TG – Frequently Asked Questions

1) How many rack units does the B-Line SB5769108TG open frame rack give me?
The SB5769108TG gives you 50 mounting spaces on a 108 inch tall frame, with 12-24 tapped panel mounting holes on the rails. That is enough height to carry a full stack of patch panels plus switches in a network bay without going to a second frame.
2) Do I need 12-24 screws or 10-32 screws for this Eaton B-Line rack?
Use 12-24 hardware. The rails on the SB5769108TG are tapped 12-24, so 10-32 rack screws and 10-32 cage-nut style hardware will not thread into them. Order your panel screws and washers in 12-24 to match.
3) Is this B-Line rack rated for a Seismic Zone 4 installation?
Yes. The SB5769108TG is built as a Seismic Zone 4 network bay open duct rack, which is why it gets specified in California and other high seismic jurisdictions. It is also UL Listed. Anchoring to the slab and any overhead bracing still has to follow the engineer's detail for the room.
4) How much does the SB5769108TG weigh and can two people set it?
The frame itself is 130 lb of steel before any equipment goes in it. That is a two-person lift and tilt-up at minimum on a nine foot frame, and you want the floor anchors laid out before you stand it.
5) What is a top angle open duct rack and when would I use it instead of an enclosed cabinet?
An open frame like the SB5769108TG has no doors or side panels, so cable and patch fields stay accessible from both sides and airflow is unrestricted. The top angle style gives you a flat angle across the top of the frame to land ladder rack, runway or duct. Pick this for a secured telecom room where the frame is bolted down and physical access is already controlled. If the equipment sits in an open or public space, or you need lockable access or contained airflow, go with an enclosure instead.
6) What footprint does this B-Line network bay rack take up on the floor?
The SB5769108TG is listed at 23 in wide, 108 in for length/depth and 108 in high. Lay out your floor anchors and front/rear working clearance off the 23 inch width, and confirm the aisle space you have before you commit to the run of bays.
7) Is the SB5769108TG UL Listed for a hospital or government spec?
Yes, it carries a UL Listed marking, which is normally what a facility or institutional spec asks for on rack and frame products. Combined with the Seismic Zone 4 construction it covers the two items that most often get flagged on a submittal for this type of frame.
8) Will this rack match the Telco gray equipment already in my network room?
Finish is Telco gray powder coat over steel, the standard telecom equipment gray, so it lines up visually with existing central office and network bay gear rather than standing out like a black rack would.
How fast can I get the B-LINE SB5769108TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5769108TG come with a warranty?
Absolutely. The B-LINE SB5769108TG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5769108TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5769108TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!