B-Line SB5774090TG Eaton serie...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4,349.59
B-Line SB5774090TG Eaton series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 58 mounting spaces, Top channel style, Seismic Zone 4, network bay closed duct rack, 11 gauge, ASTM A1011SS

B-Line SB5774090TG Eaton series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 58 mounting spaces, Top channel style, Seismic Zone 4, network bay closed duct rack, 11 gauge, ASTM A1011SS

(No reviews yet) Write a Review

Model: SB5774090TG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4,349.59
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 58 mounting spaces, Top channel style, Seismic Zone 4, network bay closed duct rack, 11 gauge, ASTM A1011SS

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Material Details:
11 gauge, ASTM A1011SS
Mounting Rails:
12-24 panel mounting holes
Product Height:
90 in
Product Length Depth:
90 in
Product Weight:
121 lb
Product Width:
19 in
Special Features:
58 mounting spaces
Surface Finish:
Telco gray powder coat
Department:
Electrical
Product Group:
Racks & Frames
Product Subgroup:
Racks
Product Type:
Seismic Zone 4, network bay closed duct rack
Product Details:
Seismic Zone 4, network bay closed duct rack
Product Style:
Top channel
Product Material:
Steel

B-LINE SB5774090TG – Frequently Asked Questions

1) Is this B-Line rack rated for a seismic installation in California?
The SB5774090TG is a Seismic Zone 4 network bay closed duct rack, which is the highest zone classification and covers the most active seismic regions. It is also UL Listed. Anchoring to the slab per the structural drawings is what carries that rating through on the job.
2) What is the difference between a closed duct network bay rack and a plain open frame relay rack?
A closed duct rack like the SB5774090TG builds vertical cable duct into the frame uprights, so jumpers and patch cords route inside the channel instead of hanging off the side. A plain open frame relay rack gives you bare uprights only and you add separate vertical managers. Pick the closed duct bay for dense patch fields and cross-connect work; a plain relay rack is enough for a few switches and a light cable count.
3) How heavy is the SB5774090TG and can one person set it?
It weighs 121 lb bare, before any equipment. At 90 inches tall and 121 lb it is a two-person lift to stand up and hold plumb while the base is anchored.
4) How much floor depth do I need to plan for this network bay rack?
Plan the footprint on 90 inches of length/depth for the SB5774090TG, with 19 inches of mounting width. That is a long floor run compared with a standard two-post relay rack, so lay it out against your room dimensions and aisle clearances before you commit the anchor points.
5) What gauge steel is the B-Line SB5774090TG made from?
11 gauge steel to ASTM A1011SS, finished in Telco gray powder coat. That is a structural hot-rolled sheet spec, which is what lets the frame carry a loaded bay and hold the Seismic Zone 4 classification rather than a lighter commercial-quality sheet.
6) Will this rack match the existing gray racks in my telecom room?
The SB5774090TG comes in Telco gray powder coat, the standard gray used across telecom and data room racking, so it lines up visually with existing Telco gray bays and ladder rack. There is only one finish offered on this model, so there is no color to specify when ordering.
7) Does the top channel style on this rack let me tie into overhead ladder rack?
Yes. The SB5774090TG uses a top channel design, which gives you a structural channel across the top of the bay to land runway or ladder rack and to bring cable down into the closed vertical duct. Runway, waterfall and any mounting hardware for the overhead are ordered separately from the rack itself.
How fast can I get the B-LINE SB5774090TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5774090TG come with a warranty?
Absolutely. The B-LINE SB5774090TG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5774090TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5774090TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!