B-Line SB5777090TG Eaton serie...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4,577.19
B-Line SB5777090TG Eaton series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 66 mounting spaces, Top channel style, Seismic Zone 4, network bay open duct rack, ASTM A1011SS

B-Line SB5777090TG Eaton series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 66 mounting spaces, Top channel style, Seismic Zone 4, network bay open duct rack, ASTM A1011SS

(No reviews yet) Write a Review

Model: SB5777090TG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4,577.19
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 66 mounting spaces, Top channel style, Seismic Zone 4, network bay open duct rack, ASTM A1011SS

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Material Details:
ASTM A1011SS
Mounting Rails:
12-24 panel mounting holes
Product Height:
84 in
Product Length Depth:
84 in
Product Weight:
121 lb
Product Width:
23 in
Special Features:
66 mounting spaces
Surface Finish:
Telco gray powder coat
Department:
Electrical
Product Group:
Racks & Frames
Product Subgroup:
Racks
Product Type:
Seismic Zone 4, network bay open duct rack
Product Details:
Seismic Zone 4, network bay open duct rack
Product Style:
Top channel
Product Material:
Steel

B-LINE SB5777090TG – Frequently Asked Questions

1) How many rack units does the B-Line SB5777090TG open frame rack give you?
The SB5777090TG provides 66 mounting spaces on a frame 84 inches tall. That is the usable panel-mounting real estate for switches, patch panels and shelving in a network bay build.
2) Will my equipment's rack ears line up with the SB5777090TG rails?
The rails are punched with 12-24 panel mounting holes, so gear with standard 19 inch EIA rack ears mounts with 12-24 screws. If your hardware ships with 10-32 or M6 hardware, you will need to source 12-24 rack screws to match this rack.
3) Is this B-Line rack approved for a Seismic Zone 4 installation?
Yes. The SB5777090TG is built as a Seismic Zone 4 network bay open duct rack, which is what you specify for the highest seismic design category on the drawing. It is also UL Listed.
4) How much floor space do I need to plan for one of these open frame racks?
Plan on a 23 inch width and 84 inch height for the frame itself. Add working clearance front and rear, since an open frame rack is accessed from both sides for cabling and gear mounting.
5) What does the top channel style on this network bay rack do for cable management?
Top channel construction gives you a structural channel across the top of the bay, which is where you land ladder rack, runway or overhead cable tray and route cable into the duct. It is the standard arrangement for a telecom bay lined up in a row rather than a standalone four-post cabinet.
6) Should I use an open frame rack like this or an enclosed cabinet for my telecom room?
An open frame bay like the SB5777090TG is the right call in a secured, dedicated telecom or MDF room where you want all-around cable access and airflow with nothing to open. Choose an enclosed cabinet instead when the equipment sits in a shared or public space and needs lockable doors, or when you need contained front-to-rear airflow and side panels. This rack has no doors or sides.
7) How heavy is the SB5777090TG rack to get into place and does it need floor anchoring?
The frame weighs 121 lb, so it is a two-person set, and at 84 inches tall it is a bare frame before any equipment goes in. A Seismic Zone 4 bay is floor anchored, so you will need concrete anchors sized to your slab and the seismic detail on your drawings; those are not part of the rack.
8) What is this rack made of and will the finish match my existing telco gear?
Steel to ASTM A1011SS, finished in telco gray powder coat, which is the standard gray used across central office and telecom bay equipment, so it lines up visually with existing bays in a room.
9) What is the exact part number to order this Eaton B-Line seismic network rack?
Order it as Eaton B-Line SB5777090TG. It ships as one configuration: telco gray, 12-24 punched rails, 66 spaces, top channel, Seismic Zone 4.
How fast can I get the B-LINE SB5777090TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5777090TG come with a warranty?
Absolutely. The B-LINE SB5777090TG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5777090TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5777090TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!