B-Line SB5779096TG Eaton serie...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4,648.56
B-Line SB5779096TG Eaton series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 75 mounting spaces, Top channel style, Seismic Zone 4, network bay closed duct rack, 11 gauge

B-Line SB5779096TG Eaton series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 75 mounting spaces, Top channel style, Seismic Zone 4, network bay closed duct rack, 11 gauge

(No reviews yet) Write a Review

Model: SB5779096TG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4,648.56
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 75 mounting spaces, Top channel style, Seismic Zone 4, network bay closed duct rack, 11 gauge

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Material Details:
11 gauge
Mounting Rails:
12-24 panel mounting holes
Product Height:
96 in
Product Length Depth:
96 in
Product Weight:
124 lb
Product Width:
23 in
Special Features:
75 mounting spaces
Surface Finish:
Telco gray powder coat
Department:
Electrical
Product Group:
Racks & Frames
Product Subgroup:
Racks
Product Type:
Seismic Zone 4, network bay closed duct rack
Product Details:
Seismic Zone 4, network bay closed duct rack
Product Style:
Top channel
Product Material:
Steel

B-LINE SB5779096TG – Frequently Asked Questions

1) Will the B-Line SB5779096TG rack accept standard 19-inch rack panels and switches?
The SB5779096TG is a 23 inch wide network bay rack with 12-24 tapped panel mounting holes, which is the telco standard thread. Gear with 19 inch EIA mounting flanges will not bolt straight to a 23 inch bay; you need 23 inch wide panels or 19-to-23 inch adapter brackets. Anything already drilled or tapped for 12-24 screws matches the rail thread as-is.
2) How much equipment height do I get on a 96 inch B-Line SB5779096TG rack?
75 mounting spaces on a 96 inch tall frame. Plan your gear in rack units against that 75 space count rather than against the raw 96 inches, since the top channel and base take up part of the height.
3) Is this B-Line rack rated for seismic installation in California?
It is built as a Seismic Zone 4 rack, which is the highest of the legacy seismic zone classifications and what specs in high seismic regions call for. It is also UL Listed. Zone 4 rating depends on the rack being anchored per the manufacturer's floor and top bracing details, so the structural anchorage on your drawings still has to be followed.
4) What does closed duct mean on a network bay rack, and when should I use one instead of a plain open frame?
A closed duct bay routes cable inside enclosed vertical channels on the frame rather than leaving it draped on open uprights. Use it where you are running high fiber or copper counts in a telco or MDF room and want bend radius protection and a tidy, inspectable dress. A plain open frame two-post is fine for light patch counts and lower cost, but you then buy separate vertical cable managers to get the same containment.
5) How much does the SB5779096TG weigh and can one person set it?
124 lb bare, at 96 inches tall. That is a two-person lift and stand at minimum, and you want the floor anchors drilled before you raise it. Add your equipment weight on top when sizing anchors.
6) Does the SB5779096TG need to be top braced or can it free stand?
Top channel style construction means the bay is made to tie into overhead runway or ladder rack at the top channel, and that top connection plus floor anchorage is how a Seismic Zone 4 frame gets its rating. Treat it as an anchored and braced installation, not a free standing rack.
7) What gauge steel is this Eaton B-Line network bay made from?
11 gauge steel throughout, finished in telco gray powder coat. That is the heavy end for open frame racks and is why it carries a Seismic Zone 4 rating rather than a light commercial rating.
8) Will this rack match the finish of existing telco racks already in my equipment room?
The finish is telco gray powder coat, the standard central office gray used across Eaton B-Line network bays, so it lines up visually with existing telco-gray frames. Model number for reordering to match is SB5779096TG.
How fast can I get the B-LINE SB5779096TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5779096TG come with a warranty?
Absolutely. The B-LINE SB5779096TG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5779096TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5779096TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!