B-Line SB5767084YZ Eaton serie...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4,488.46
B-Line SB5767084YZ Eaton series open frame racks, Steel, Yellow zinc, 12-24 panel mounting holes, 48 mounting spaces, Top angle style, Seiemic zone 4, network bay open duct rack, 6 gauge, ASTM A1011SS

B-Line SB5767084YZ Eaton series open frame racks, Steel, Yellow zinc, 12-24 panel mounting holes, 48 mounting spaces, Top angle style, Seiemic zone 4, network bay open duct rack, 6 gauge, ASTM A1011SS

(No reviews yet) Write a Review

Model: SB5767084YZ
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4,488.46
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Steel, Yellow zinc, 12-24 panel mounting holes, 48 mounting spaces, Top angle style, Seiemic zone 4, network bay open duct rack, 6 gauge, ASTM A1011SS

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Material Details:
6 gauge, ASTM A1011SS
Mounting Rails:
12-24 panel mounting holes
Product Height:
84 in
Product Length Depth:
84 in
Product Weight:
118 lb
Product Width:
23 in
Special Features:
48 mounting spaces
Surface Finish:
Yellow zinc
Department:
Electrical
Product Group:
Racks & Frames
Product Subgroup:
Racks
Product Type:
Seiemic zone 4, network bay open duct rack
Product Details:
Seiemic zone 4, network bay open duct rack
Product Style:
Top angle
Product Material:
Steel

B-LINE SB5767084YZ – Frequently Asked Questions

1) How many rack units does the B-Line SB5767084YZ open frame rack give me?
The SB5767084YZ is an 84 inch tall open frame rack with 48 mounting spaces, so you get 48U of usable equipment mounting height in a single bay.
2) Are the rails tapped 12-24 or do I need cage nuts?
Rails on this Eaton B-Line network bay rack are tapped with 12-24 panel mounting holes, so equipment and panels mount with 12-24 screws directly. No cage nuts or square-hole hardware are used.
3) Will this rack meet a seismic Zone 4 requirement on my project drawings?
Yes. The SB5767084YZ is specified as a seismic zone 4 network bay open duct rack, which is why it is built from 6 gauge ASTM A1011SS steel rather than lighter stock. Anchoring to the slab per the project's seismic detail is still part of the install.
4) What are the footprint dimensions of the SB5767084YZ so I can lay out my telecom room?
Published dimensions are 84 inches high, 23 inches wide, and 84 inches for length/depth, with a shipping/product weight of 118 lb. Plan aisle clearance on both sides since an open frame rack is accessed front and rear.
5) Is this B-Line rack UL Listed?
Yes, the SB5767084YZ carries a UL Listed certification, which is typically what a specifying engineer or institutional inspector wants to see on a telecom equipment rack.
6) What does the top angle style on this rack do for cable management?
The SB5767084YZ is a top angle style open duct rack. The angle at the top of the frame is what runway, ladder rack, or overhead duct attaches to, so the rack ties into an overhead cable pathway instead of routing everything down the uprights.
7) Should I use an open frame rack like this or an enclosed cabinet?
An open frame rack such as the SB5767084YZ is the choice for a secured telecom or IDF room: it gives full front and rear access, free air movement, and a direct tie-in to overhead cable pathway through its top angle. Go with an enclosed cabinet instead when the equipment sits in an unsecured or public area, or needs dust protection or a locking door, since an open frame provides none of those.
8) Is a yellow zinc finish rack OK for a data room, or should I be looking at black?
Yellow zinc is a plated corrosion-resistant finish on steel, used where protection matters more than appearance, and it is what the SB5767084YZ ships with. If the room is architecturally exposed and the spec calls for a black powder coat to match adjacent cabinets, this is not a cosmetic match.
9) What is the exact part number to order this 48-space B-Line rack?
Order Eaton B-Line part number SB5767084YZ. That single MPN covers the yellow zinc, 12-24 tapped, 48 space seismic zone 4 network bay rack.
How fast can I get the B-LINE SB5767084YZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5767084YZ come with a warranty?
Absolutely. The B-LINE SB5767084YZ is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5767084YZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5767084YZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!