B-Line SB5769108YZ Eaton serie...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4,768.14
B-Line SB5769108YZ Eaton series open frame racks, Steel, Yellow zinc, 12-24 panel mounting holes, 50 mounting spaces, Top angle style, Seismic Zone 4, network bay open duct rack, ASTM A570

B-Line SB5769108YZ Eaton series open frame racks, Steel, Yellow zinc, 12-24 panel mounting holes, 50 mounting spaces, Top angle style, Seismic Zone 4, network bay open duct rack, ASTM A570

(No reviews yet) Write a Review

Model: SB5769108YZ
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4,768.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Steel, Yellow zinc, 12-24 panel mounting holes, 50 mounting spaces, Top angle style, Seismic Zone 4, network bay open duct rack, ASTM A570

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Material Details:
ASTM A570 grade 33 steel
Mounting Rails:
12-24 panel mounting holes
Product Height:
108 in
Product Length Depth:
108 in
Product Weight:
130 lb
Product Width:
23 in
Special Features:
50 mounting spaces
Surface Finish:
Yellow zinc
Department:
Electrical
Product Group:
Racks & Frames
Product Subgroup:
Racks
Product Type:
Seismic Zone 4, network bay open duct rack
Product Details:
Seismic Zone 4, network bay open duct rack
Product Style:
Top angle
Product Material:
Steel

B-LINE SB5769108YZ – Frequently Asked Questions

1) How many rack units does the B-Line SB5769108YZ open frame rack give me?
The SB5769108YZ gives you 50 mounting spaces on a frame that stands 108 inches tall. That is a full-height network bay rack, taller than the common 84 inch two-post, so plan on ceiling clearance and overhead cable runway height before you commit to it.
2) What hole pattern are the rails tapped for, and will my equipment screws fit?
Rails on this Eaton B-Line network bay rack are drilled with 12-24 panel mounting holes, so you need 12-24 rack screws and cage-nut-free mounting. Equipment shipped with 10-32 or M6 hardware will not thread into it, so order 12-24 screws with the rack.
3) Is this rack rated for a seismic zone 4 installation?
Yes. The SB5769108YZ is built as a Seismic Zone 4 network bay open duct rack, which is what a data center or hospital spec in a high seismic region calls for. It is also UL Listed. Anchoring to the slab and overhead bracing still have to follow the engineer's detail on the drawing.
4) What footprint does this 108 inch B-Line rack need on the floor?
It measures 23 inches wide with a stated length/depth of 108 inches, and the frame weighs 130 lb bare. Lay out your hot aisle and anchor points off the 23 inch width, and figure two people to stand it up before equipment goes in.
5) Is a yellow zinc open frame rack okay for an indoor telecom room?
Yellow zinc plating over steel is an indoor finish, and that is exactly where this network bay rack belongs, in a conditioned MDF, IDF or data room. It is not a painted or powder coated enclosure and it has no doors or side panels, so if you need dust protection or lockable access, you want a cabinet instead of an open frame.
6) What steel is the Eaton B-Line SB5769108YZ made from?
The frame is ASTM A570 grade 33 steel. That is the structural sheet steel grade the seismic rating is qualified on, so if your submittal asks for a material callout, ASTM A570 grade 33 is the line to put on it.
7) What does top angle style mean on this rack?
Top angle style means the rack has angle stock across the top of the uprights rather than a flat plate or a closed top. That is the surface you use to tie into overhead cable runway or ladder rack, which is how these open duct network bays are normally braced and cabled.
8) What is the exact part number to order this B-Line open frame rack?
Order it as Eaton B-Line SB5769108YZ. That single part number covers the 108 inch yellow zinc network bay with 50 mounting spaces and 12-24 rails; there are no finish or height options under it.
How fast can I get the B-LINE SB5769108YZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5769108YZ come with a warranty?
Absolutely. The B-LINE SB5769108YZ is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5769108YZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5769108YZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!