B-Line SB5773108YZ Eaton serie...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4,527.04
B-Line SB5773108YZ Eaton series open frame racks, Steel, Yellow zinc, 12-24 panel mounting holes, 58 mounting spaces, Top channel style, Seismic Zone 4, network bay closed duct rack, ASTM A1011SS

B-Line SB5773108YZ Eaton series open frame racks, Steel, Yellow zinc, 12-24 panel mounting holes, 58 mounting spaces, Top channel style, Seismic Zone 4, network bay closed duct rack, ASTM A1011SS

(No reviews yet) Write a Review

Model: SB5773108YZ
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4,527.04
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Steel, Yellow zinc, 12-24 panel mounting holes, 58 mounting spaces, Top channel style, Seismic Zone 4, network bay closed duct rack, ASTM A1011SS

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Material Details:
ASTM A1011SS
Mounting Rails:
12-24 panel mounting holes
Product Height:
108 in
Product Length Depth:
108 in
Product Weight:
130 lb
Product Width:
19 in
Special Features:
58 mounting spaces
Surface Finish:
Yellow zinc
Department:
Electrical
Product Group:
Racks & Frames
Product Subgroup:
Racks
Product Type:
Seismic Zone 4, network bay closed duct rack
Product Details:
Seismic Zone 4, network bay closed duct rack
Product Style:
Top channel
Product Material:
Steel

B-LINE SB5773108YZ – Frequently Asked Questions

1) Will the B-Line SB5773108YZ rack fit standard 19 inch rack-mount equipment?
Yes. The SB5773108YZ is a 19 inch wide rack with 12-24 panel mounting holes on the rails, which is the standard EIA-style tapped hole pattern used on network and telecom equipment panels. Equipment with standard 19 inch rack ears will mount directly, using 12-24 screws rather than cage nuts.
2) How many rack units of equipment can the SB5773108YZ hold?
It gives you 58 mounting spaces over a 108 inch frame height. That is the usable panel space you have to plan against when laying out switches, patch panels and cable management.
3) Is this B-Line rack rated for a seismic installation?
The SB5773108YZ is built as a Seismic Zone 4 network bay closed duct rack, so it is intended for the highest seismic design category work. Seismic performance still depends on anchoring it to the slab per the engineer's detail, since the rack rating covers the frame, not your floor attachment.
4) What does the closed duct design on this network bay rack do for cable management?
The closed duct construction gives the vertical uprights an enclosed channel, so cable bundles run inside the frame rather than draped across the face of the equipment. Combined with the top channel style, it lets you drop from an overhead runway straight into the rack and route down without add-on vertical wire managers.
5) Is the SB5773108YZ rack UL Listed?
Yes, the SB5773108YZ carries a UL Listing. That is usually what an inspector or institutional spec is looking for on telecom bay hardware.
6) How heavy is this rack and can one person set it?
The frame weighs 130 lb bare, before any equipment. At 108 inches tall that is a two-person lift minimum to stand it upright and hold it while the floor anchors go in.
7) Is a yellow zinc finished rack OK for an indoor data closet?
Yellow zinc plating over the steel frame is a dry-location finish, fine for indoor MDF, IDF and data room use. It is not a paint finish, so it will not match black powder coated racks visually if you are standardizing a row on appearance.
8) What steel is the Eaton B-Line SB5773108YZ frame made from?
The frame is steel to ASTM A1011SS, a hot-rolled structural sheet steel specification. That is the material callout to put on a submittal when an engineer asks what the bay is fabricated from.
How fast can I get the B-LINE SB5773108YZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5773108YZ come with a warranty?
Absolutely. The B-LINE SB5773108YZ is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5773108YZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5773108YZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!