B-Line SB5548108TG Eaton serie...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2,666.53
B-Line SB5548108TG Eaton series open frame racks, Used to mount electronic switching equipment, Steel, Telco gray powder coat, 12-24 panel mounting holes, 43 mounting spaces, Top angle style, Seismic Zone 4, closed duct unequal flange rack

B-Line SB5548108TG Eaton series open frame racks, Used to mount electronic switching equipment, Steel, Telco gray powder coat, 12-24 panel mounting holes, 43 mounting spaces, Top angle style, Seismic Zone 4, closed duct unequal flange rack

(No reviews yet) Write a Review

Model: SB5548108TG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2,666.53
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Used to mount electronic switching equipment, Steel, Telco gray powder coat, 12-24 panel mounting holes, 43 mounting spaces, Top angle style, Seismic Zone 4, closed duct unequal flange rack

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Mounting Rails:
12-24 panel mounting holes
Product Height:
108 in
Product Length Depth:
108 in
Product Weight:
99 lb
Product Width:
23 in
Special Features:
43 mounting spaces
Surface Finish:
Telco gray powder coat
Department:
Electrical
Product Group:
Racks & Frames
Product Subgroup:
Racks
Product Type:
Seismic Zone 4, closed duct unequal flange rack
Product Details:
Seismic Zone 4, closed duct unequal flange rack
Product Style:
Top angle
Product Material:
Steel

B-LINE SB5548108TG – Frequently Asked Questions

1) Will the B-Line SB5548108TG rack accept standard 19-inch rack-mount switching equipment?
The SB5548108TG is an Eaton B-Line open frame rack drilled with 12-24 panel mounting holes and 43 mounting spaces, and it is built to mount electronic switching equipment. Equipment with 12-24 tapped-hole mounting will bolt straight in with no cage nuts. Gear that ships with M6 or 10-32 hardware needs matching screws, since the rails here are 12-24 only.
2) Is this B-Line rack rated for a Seismic Zone 4 installation?
Yes. The SB5548108TG is a Seismic Zone 4, closed duct unequal flange rack, which is the configuration specified for the highest seismic zone in central office and data room work. Anchoring to the floor slab and bracing to overhead per the job's seismic detail is still required - the rack rating does not stand in for the anchorage design.
3) What footprint does the SB5548108TG take up on the floor?
The frame is 23 inches wide with a stated length/depth of 108 inches, and it weighs 99 pounds bare. Lay out your aisle spacing off the 23 inch width when you are lining up multiple frames in a row.
4) What does closed duct unequal flange mean on a telco rack?
On the SB5548108TG the uprights are an unequal flange section with a closed duct, so the channel is enclosed rather than open C-shape. The deeper flange faces the equipment side for panel mounting while the closed duct gives the upright its stiffness, which is what carries the Seismic Zone 4 rating on this frame. Practically, it means you do not get an open vertical channel to drop cable into on the upright itself - plan vertical cable management alongside the frame.
5) Is the SB5548108TG UL Listed?
UL Listed, which is what most institutional and telecom specs call for on open frame relay racks. Steel construction throughout.
6) Do I need anything else to install the B-Line SB5548108TG?
This is an open frame rack, not an enclosure, so there are no side panels, doors or top cover. For a finished install you will typically add floor anchors sized to your slab, overhead ladder rack or cable runway to land on the top angle, vertical and horizontal cable management, and a grounding busbar. Equipment mounting screws need to be 12-24 to match the rails.
7) Will this rack match the telco gray frames already in my equipment room?
The finish is a telco gray powder coat over steel, the standard equipment room color, so it lines up visually with existing B-Line telco frames and gray relay racks. If your room was built out in black, this one will not match.
How fast can I get the B-LINE SB5548108TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5548108TG come with a warranty?
Absolutely. The B-LINE SB5548108TG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5548108TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5548108TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!