Eaton B-Line series panels and panel accessories, NEMA 12 rating, White powder coated stainless steel, JIC and small panels, Panels and panel accessories, Stainless panel
Manufacturer Resources
Product Specs
- Certifications:
- NEMA
- Degree Of Protection:
- NEMA 12
- Product Category:
- Panels & panel accessories
- Product Height:
- 10.87 in
- Product Length Depth:
- 10.875 in
- Product Weight:
- 2.513 lb
- Product Width:
- 10.87 in
- Department:
- Electrical
- Product Group:
- Panels & Plates
- Product Subgroup:
- Panel Accessories
- Product Type:
- JIC & small panels
- Product Details:
- JIC & small panels
- Product Material:
- Stainless steel
B-LINE AW1212SP – Frequently Asked Questions
1) What size is the Eaton B-Line AW1212SP back panel?
The AW1212SP panel measures 10.87 in high, 10.87 in wide, and is listed at 10.875 in for length/depth, so it is a square panel sized to drop into a nominal 12 x 12 enclosure. It weighs 2.513 lb, light enough for one person to hang on the enclosure's mounting studs.
2) Is this an enclosure or just the inner mounting plate?
It is the panel only, a flat white powder coated stainless plate for JIC and small enclosures. You drill and tap it for your DIN rail, contactors, terminal blocks, or PLC base and then mount it inside the box. The enclosure, door, and latching hardware are separate items.
3) Will the AW1212SP fit a 12 x 12 JIC junction box?
It is sized for a nominal 12 x 12 small or JIC style enclosure, at 10.87 in by 10.87 in, which leaves the usual clearance from the box walls to the panel edge. Measure the stud-to-stud spacing in your box before ordering, because panel mounting stud locations vary between enclosure manufacturers even at the same nominal box size.
4) Is the AW1212SP panel stainless steel or painted mild steel?
Stainless steel with a white powder coat finish. The white coating gives better contrast for laying out and seeing components inside the box, while the stainless substrate is what you want in washdown, food handling, or humid plant areas where a painted mild steel panel would eventually rust at drilled and tapped holes.
5) What NEMA rating does the B-Line AW1212SP carry?
It is a NEMA 12 rated item within the Eaton B-Line panels and panel accessories line. NEMA 12 covers indoor protection against falling dirt, circulating dust, and dripping non-corrosive liquids. Keep in mind the enclosure itself is what holds the rating in service; the back panel is the mounting plate inside it.
6) Can I drill and tap this panel for DIN rail and components?
Yes, that is what a back panel is for. The AW1212SP is solid stainless steel with a white powder coat, so it takes drilling and tapping for DIN rail, wire duct, and device feet. On stainless, use sharp bits, slow speed, and steady feed, and touch up any exposed cut edges if the panel is going into a wet or corrosive area.
How fast can I get the B-LINE AW1212SP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE AW1212SP come with a warranty?
Absolutely. The B-LINE AW1212SP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE AW1212SP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE AW1212SP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.